OpenWrt Forum Archive

Topic: can't put Asus WL-500g in station mode width rc3 ???

The content of this topic has been archived on 6 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
hiphin
10 Nov 2005, 19:32

I have 1 500g-deluxe, and 2 500g, 500gd is my ap width WEP... problem is width 500g in client mode, whet ever I try to set ssid from console or web interface i get

eth2      IEEE 802.11-DS  ESSID:""
          Mode:Repeater  Frequency:2.437 GHz  Tx-Power:31 dBm
          RTS thr=2347 B   Fragment thr=2346 B
          Encryption key:1111-1111-11
          Link Quality:0  Signal level:0  Noise level:159
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:224  Invalid misc:0   Missed beacon:0

what is wrong, width oleg's image everything works fine, I need SSID, Managed mode !!! PLEASE PLEASE PLEASE HELP


(http://downloads.openwrt.org/people/nbd/whiterussian/openwrt-brcm-2.4-jffs2-4MB.trx <-- I'm using this)

regards

Post #2
hiphin
10 Nov 2005, 19:55

ok, listen this,... I set every thing as for AP (master mode)... and give him,

iwconfig eth2 mode managed

it show's something I would like to be, but it doesnt connect to ap

eth2      IEEE 802.11-DS  ESSID:"myASUS500g" 
          Mode:Managed  Frequency:2.437 GHz  Tx-Power:31 dBm   
          RTS thr=2347 B   Fragment thr=2346 B   
          Encryption key:1111-1111-11
          Link Quality:0  Signal level:0  Noise level:157
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:633  Invalid misc:0   Missed beacon:0

?????????? anyone ????????

The discussion might have continued from here.