OpenWrt Forum Archive

Topic: Troubles with PC/SC USB smartreader

The content of this topic has been archived on 14 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
jerrino77
9 Dec 2011, 15:14

Hello all, i have many troubles to connect my Kinforce XR1 PC/SC usb smart reader to my router. I have a Netgear wndr3700v2 running OpenWrt "Attitue Adjustement" rev. 29330.

I would use this reader for my pay-tv card, so i installed OScam for my platform. But Oscam won't recognize reader. I put in config file to search "device = 0", as in the oscam board was suggested, because (as read there) all of that kind of devices start from 0. But my dmesg output say that:

usb 2-1: new low speed USB device number 2 using ar71xx-ohci

and, also with "device = 2" setting, the reader is not recognized.

this is my lsusb output

Bus 002 Device 002: ID 096e:0005 Feitian Technologies, Inc.

so i guess that chipset is a Feitian, and the reader will like Feitian R200.

So my question is: should it works? I have to find some specific drivers? The libpcsc is to 1.5.5 version, it is possible to compile a new version 1.8.1? And what about ccid?
I need help to compile drivers from source, Thanks

Post #2
maikeln
29 Dec 2011, 17:55

same problem, not work oscam on tplink 1043nd and pcsc

The discussion might have continued from here.