OpenWrt Forum Archive

Topic: Comtrend CT-5361 ADSL (WAN) Connection (How-to?)

The content of this topic has been archived on 25 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
FruttiFresh
19 Dec 2011, 16:56

Hi @all,

how can I establish internet connection via the the built-in ADSL Modem?

I used the (CT-5361) Wiki to setup the device - flashing to OpenWRT and WiFi wasn´t a problem... but if I connect to the ADSL Line nothing happens!
Who can help? I want to connect to Telefonica/Movistar Spain.....

I used:

uci set network.wan.proto=pppoe
uci set network.wan.username=adslppp@telefonicanetpa
uci set network.wan.password=adslppp
uci commit network && ifup wan

[default settings for Telefonica/Movistar Spain)

I also miss VPI/VCI settings (should be 8/32) - PPPoA?

Thanks in advance
Frutti

(Last edited by FruttiFresh on 19 Dec 2011, 17:06)

Post #2
netbus
15 Feb 2012, 08:23

hy,
I have the same problem.
Any solution in this case?

Post #3
FruttiFresh
19 Feb 2012, 09:16

hi,

there is no support for the internal modem (RJ11 wan interface).

So no luck with that device sad

The discussion might have continued from here.