The Dlink DSL-2750U U1 Firmware Version:IN_1.08 is available at this download link:
http://s000.tinyupload.com/?file_id=066 … 1566693134
Topic: Dsl-2750u
The content of this topic has been archived between 6 Apr 2018 and 12 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
ok so this router has probably been branded differently in EU/USA/RU. and there are different H/W versions
DSL-2750U H/W T1 board id=96328ang
Profile=generic-96328avng-8M - 64K - jffs2.bin
packages= b43, wpad-mini, + packages for extroot(blkid, block-mount,ext4-fs,usb-TESTING VARIOUS)if you use a jffs2 64k image and not a squashfs image there is no jffs2 errors.
they dont have that image on the download section. so you have to build it and i coulden't get the chaos-calmmer15.1-imagebuilder to make a jffs2 image, so i used trunk source.root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 6.6M 4.2M 2.4M 64% /
tmpfs 29.7M 536.0K 29.2M 2% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
root@OpenWrt:~#its low on memory and usb not working ATM.
But it saves setting and works as wi-fi repeater/extender/switch.
@acdcat - could you be so kind and share this firmware with me?
The discussion might have continued from here.