The content of this topic has been archived on 4 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hi all,
please help me...
my wrt54gs v1.1 is dead
power led to blink nonstop..
i dont ping my router (192.168.1.1)
my router dead after this settings..
# nvram set sdram_init=0x0008
~ # nvram set sdram_ncdl=0x0000
~ # nvram commit
~ # reboot
my older settings
sdram_ncdl=0xfe0008
sdram_init=0x010b
please help me.
Please read about building a JTAG cable here: http://wiki.openwrt.org/OpenWrtDocs/Tro … ea93ffbadd and use it to erase your nvram
i try jtag cable ..with wrtjtag(win32)
wrtjtag.exe -erase:nvram
wrtjtag.exe -erase:kernel
wrtjtag.exe -flash:cfe
with cpe.bin (for wrt54gs v1.1)
i apply this commands but dont work..
thats not all!.. i try short pin debrick method .. (15-16pin or 5-6)
my router not changed.. my power led blinked again...
:'( ....
The discussion might have continued from here.