The content of this topic has been archived on 18 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi all,
i've a Netgear DG834GT with openwrt firmware, (openwrt-DG834GT_DG834PN-squashfs-cfe_Backfire_10_03_svn25563) and i need to re-flash to the original Netgear firmware.
I've tryed with web gui flashing without results, tryed recovery tool but the device is not listed and now i don't know how to do 
Can anyone help me please?
I'm not really an expert so be patient 
Thank in advance!
Solved flashing in Linux with NFTP Command Line Utility (Unix systems).
Here the nftp.c file for download: http://wilmer.gaa.st/834root/
edit the file where is the check of the router model and comment there.
compile in linux with these commands: gcc -o nftp nftp.c
put all files including the original firmware you want to flash in the same folder and send the router in recovery mode by pressing and hold the reset button and powering up the device, until front leds flashing green and orange
then prompt in that directory: sudo ./nftp -u eth0 <nameofyourfirmware.img>
wait until flash is complete and reboot.
(Last edited by MaxPower84 on 11 Feb 2012, 12:25)
The discussion might have continued from here.