OpenWrt Forum Archive

Topic: wrt160nl - samba and firewall

The content of this topic has been archived on 12 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
RMichal
22 Feb 2012, 18:45

I have a problem with the firewall and samba.

Linksys WRT160NL
Firmware OpenWrt Backfire 10.03.1 / LuCI 0.10.0 Release (0.10.0)
Kernel Version2.6.32.27

When turned on the firewall in OpenWRT, samba is sharing from the router and share from other PC unavailable.
If I turn off the firewall on OpenWRT and everything works fine as is, samba and other PCs are available.
I have everything set up according to instructions on http://wiki.openwrt.org/doc/start. I attach the image settings firewall.

Many thanks in advance for your help.

http://img191.imageshack.us/img191/213/openwrtfirewall.jpg

(Last edited by RMichal on 22 Feb 2012, 19:26)

The discussion might have continued from here.