hi, all:
   I have bricked my WGT624 for serveral weeks due to a upgrade failure. Now I have connected via serial port and can control the bootloader. But I lack a working version of either original apimg1 or a hacked firmware. Thus make my restore impossible. sad I planned to boot from a booted working environment and then use its upgrade rom option to upgrade to working firmware.
   Is there any extracted flash image from the working router? Thus I can flash it using FLASH programmer. Or any idea of extracting the apimg1 from the firmware downloaded from netgear support site? I have spent some time in comparing difference between different versions, but seems to difficult to do from this side.
   Thanks.
--
  Chen