Hi,

I have installed openwrt-wgt634u-2.6-jffs2.bin on wgt634u. I would like to connect the router in a client mode to an access point that uses wpa-psk. I have installed wpa-supplicant_0.3.9-1_mipsel.ipk but I am not able to authenticate. Can some one please guide me in right direction I would greatly appriciate. I get the following output when I execute wpa_supplicant,

root@OpenWrt:/# /usr/sbin/wpa_supplicant -d -c/etc/wpa_supplicant.conf -i ath0
Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'default'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Priority group 5
   id=0 ssid='Netgear'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:00:aa:da:dc:dc
Segmentation fault
root@OpenWrt:/#

I am guessing wpa_supplicant is not compiled for madwifi