salve sono nuovo su questo forum e spero di imparare molto da voi e dalle vostre discussioni. Recentemente ho cambiato il firmware originale del mio router tp link wr1043nd. da li ha iniziato a dare problemi con il wan allora ho reinstallato l'originale ma anche qui non va il wan. allora decido di rimettere l'openwrt ma distrattamente scarico e installo un firmwer senza webinterface; ora riesco ad accedere al router solo attraverso telnet o ssh, non posso scaricare pacchetti da internet perche non riesco a configurare internet e in piu ancora non ho dimestichezza in questo ambiente. quindi mi rimane complicato lavorarci qualcuna so come risolvere il mio problema?? grazie a tutti

Comunque mi chiamo lorenzo e scusatemi ma non ho trovato la pagina per presentarmi e lo faccio qui.

Hi, I'm new on this forum and hope to learn a lot from you and from your discussions. I recently changed the original firmware of my router tp link wr1043nd, from there he started to give problems with the wan then I reinstalled the original but again does not wan. So I decide to put the openwrt but carelessly discharge and install a webinterface firmwer no, now I can only access the router via telnet or ssh, I can not download packages from the internet because I can not configure internet and most still have not familiar in this environment. remains difficult to work with someone so I know how to solve my problem? Thanks to all
Anyway my name is Lorenzo and I'm sorry but I have not found the page to introduce myself and I do here.

hello, I have always the same error. I managed to run the connection, then telnet always I installed the GUI, then I updated the firmware with this, barrier breaker r37154, what I read now with telnet!, Because after a careful configuration, after rebooting the router here's that again does not work anymore lights and are forced to re-operate in telnet. someone can help me in the configuration?

The development branch (codename: BARRIER BREAKER) does not come with a preinstalled web interface, the idea being that if you're comfortable installing an unstable version you should also be ok with using the cmdline interface.

You need to add the LUCI web interface if you're using BB:
http://wiki.openwrt.org/doc/howto/luci.essentials

AA 12.09 has wifi troubles on 1043, for sure. I installed  BB r38226 and it works fine.