I am having issues getting both Backfire & trunk working on this platform.
My question is: can I use the generic images, or do I need to MAKE one specifically for the platform?
I am using either:
- http://downloads.openwrt.org/backfire/1 … xt2.img.gz, or
- http://downloads.openwrt.org/snapshots/ … xt4.img.gz
Once I boot the PC, I use scripts to configure it, but the system seems to freeze once I install kmod-usb-storage and ath9k.
I don't want to create the image myself, I'd rather use the generic image & install the modules/packages I need...
Here is an example of a dmesg error from the Backfire build:
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:148 0xc1019a28()
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32.27 #5
Call Trace:
[<c1019a28>] ? 0xc1019a28
[<c102276f>] ? 0xc102276f
[<c1019a28>] ? 0xc1019a28
[<c10227b3>] ? 0xc10227b3
[<c1019a28>] ? 0xc1019a28
[<c102882a>] ? 0xc102882a
[<c12f85f0>] ? 0xc12f85f0
[<c1019d54>] ? 0xc1019d54
[<c12f860f>] ? 0xc12f860f
[<c12f860f>] ? 0xc12f860f
[<c12f85ba>] ? 0xc12f85ba
[<c1001062>] ? 0xc1001062
[<c12e753a>] ? 0xc12e753a
[<c12e74a0>] ? 0xc12e74a0
[<c1003327>] ? 0xc1003327
---[ end trace a7919e7f17c0a725 ]---(Last edited by zxdavb on 21 Jun 2012, 22:18)