OpenWrt Forum Archive

Topic: wrt54gl cant ssh after flash

The content of this topic has been archived on 26 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi all,

Kinda new here so my question might be stupid. Here we go.

I upgraded my wrt54gl to whiterussian with squashfs but never ran the code below

nvram set boot_wait=on
nvram set boot_time=10
nvram commit && reboot

It still works but only as a switch and I can't ssh/telnet or access the web. Can anyone please help?

Thanks

Power the unit on, wait until the DMZ led lights up, press reset for a short moment (not more than a second). The dmz and/or power leds should start to blink.
At this point you can reach the box at 192.168.1.1 with telnet.

worked perfectly. Thank you very much

The discussion might have continued from here.