Siemens SX 541, SMC SMC7908VoWBRB
both nearly identical hardware, smc has a bigger switch.
have tryed to run openwrt with a from stefan (se154) and it looks like we can bring this up...
2 bootlogs attached, may anybody can help...
would like to get this hardware added to openwrt...
this bootlog, we get when a warm boot from console was done after flashing.
Done!
Do you want to execute the uploaded code? (Y/n)
Jump to address 0x94200000 ...
Launching kernel decompressor.
Kernel decompressor was successful ... launching kernel.
setup.c:129
argc = 16384
argv = 0x00000010
envp = 0x80004000
prom_vec = 0x942003bc
LINUX started...
CPU revision is: 00018448
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Linux version 2.4.32 (stefan@heipc81849) (gcc version 3.4.4) #1 So Jan 1
15:47:32 CET 2006
Determined physical RAM map:
memory: 00000000 @ 14000000 (ROM data)
memory: 01000000 @ 14000000 (usable)
max_low_pfn = 0x00015000
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
start = 0x14000000, end = 0x13ffffff, maxmem = 0x20000000
start = 0x14000000, end = 0x14ffffff, maxmem = 0x20000000
Kernel command line: root=/dev/nfs rw nfsroot=/nfsroot,nolock
ip=192.168.2.1:192.168.2.2::255.255.255.0:sinus:eth0:off debug
console=ttyS0,115200 init=/etc/preinit.sinus154 noinitrd
set_except_vector: using long jump via k0 to reach 940051e0
the pacing pre-scalar has been set as 600.
set_except_vector: using long jump via k0 to reach 941459c0
Using 75.000 MHz high precision timer.
Calibrating delay loop... 149.91 BogoMIPS
Memory: 14388k/16384k available (1442k kernel code, 1996k reserved, 96k
data, 80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
irq.c:172 startup_avalanche_irq(29)
VLYNQ 1 : init failed
ar7_wdt: last system reset initiated by watchdog
ar7_wdt: disabling watchdog timer
ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq
62500000)
psp_config_build.c:130 detected cpmac_phy = 0
Using the MAC with internal PHY
Cpmac driver is allocating buffer memory at init time.
Using the MAC with internal PHY
avalanche_led_register(cpmac,0)
Cpmac driver Disable TX complete interrupt setting threshold to 20.
avalanche_led_action(cpmac,0)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
irq.c:172 startup_avalanche_irq(27)
IP-Config: Complete:
device=eth0, addr=192.168.2.1, mask=255.255.255.0, gw=255.255.255.255,
host=sinus, domain=, nis-domain=(none),
bootserver=192.168.2.2, rootserver=192.168.2.2, rootpath=
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
Unable to handle kernel paging request at virtual address 00000c00, epc ==
9417bb28, ra == 9417ba5c
Oops in fault.c::do_page_fault, line 206:
$0 : 00000000 10008400 c0000000 00000000 00000001 941c0000 94197b80 94197e50
$8 : 94190000 941a2d20 94190000 941a0000 00000f86 10008401 00000000 00000001
$16: 941c0000 941c0000 00010f00 00000000 00000001 00000001 00000000 00000000
$24: ba2e8ba3 941a46f4 94ff4000 94ff5f68 00800000 9417ba5c
Hi : 00000000
Lo : 00000006
epc : 9417bb28 Not tainted
Status: 10008403
Cause : 10800008
PrId : 00018448
Process swapper (pid: 1, stackpage=94ff4000)
Stack: 00000000 000001f2 000007df 00001741 00000000 00000000 00000000
00000000 94117a8c 00000000 00000001 00000001 00000000 00000000 9417f20c
94000870 9417f190 941a46f4 ffffffff 00000000 94000834 94002650 00800000
94012140 10008403 00000001 9405c080 00000000 10800020 94002640 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace: [<94117a8c>] [<94000870>] [<94000834>] [<94002650>]
[<94012140>]
[<9405c080>] [<94002640>]
Code: 000418c0 24840001 00621021 <ac420000> 8e0225a4 00621821 ac630004
8ca22594 0905eec5
Kernel panic: Attempted to kill init!
after cold boot:
Jump to address 0x94200000 ...
Launching kernel decompressor.
Kernel decompressor was successful ... launching kernel.
setup.c:129
argc = 16384
argv = 0x00000010
envp = 0x80004000
prom_vec = 0x942003bc
LINUX started...
CPU revision is: 00018448
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Linux version 2.4.32 (user@linux) (gcc version 3.4.4) #6 Fr Jan 6 18:34:11
CET 2006
Determined physical RAM map:
memory: 00000000 @ 14000000 (ROM data)
memory: 01000000 @ 14000000 (usable)
max_low_pfn = 0x00015000
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
start = 0x14000000, end = 0x13ffffff, maxmem = 0x20000000
start = 0x14000000, end = 0x14ffffff, maxmem = 0x20000000
Kernel command line: root=/dev/nfs rw nfsroot=/nfsroot,nolock
ip=192.168.2.1:192.168.2.2::255.255.255.0:sinus:eth0:off debug
console=ttyS0,115200 init=/etc/preinit.sinus154 noinitrd
set_except_vector: using long jump via k0 to reach 940051e0
the pacing pre-scalar has been set as 600.
set_except_vector: using long jump via k0 to reach 941459c0
Using 75.000 MHz high precision timer.
Calibrating delay loop... 149.91 BogoMIPS
Memory: 14388k/16384k available (1442k kernel code, 1996k reserved, 96k
data, 80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
VLYNQ INIT FAILED: Please try cold reboot.
VLYNQ 0 : init failed
VLYNQ 1 : init failed
ar7_wdt: last system reset initiated by hardware reset
ar7_wdt: disabling watchdog timer
ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq
62500000)
psp_config_build.c:130 detected cpmac_phy = 0
Using the MAC with internal PHY
Cpmac driver is allocating buffer memory at init time.
Using the MAC with internal PHY
avalanche_led_register(cpmac,0)
Cpmac driver Disable TX complete interrupt setting threshold to 20.
avalanche_led_action(cpmac,0)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
irq.c:172 startup_avalanche_irq(27)
IP-Config: Complete:
device=eth0, addr=192.168.2.1, mask=255.255.255.0, gw=255.255.255.255,
host=sinus, domain=, nis-domain=(none),
bootserver=192.168.2.2, rootserver=192.168.2.2, rootpath=
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
ip_conntrack_init:1493 i=0, addr=c0000000
ip_conntrack_init:1493 i=1, addr=c0000008
ip_conntrack_init:1493 i=2, addr=c0000010
ip_conntrack_init:1493 i=3, addr=c0000018
ip_conntrack_init:1493 i=4, addr=c0000020
ip_conntrack_init:1493 i=5, addr=c0000028
ip_conntrack_init:1493 i=6, addr=c0000030
ip_conntrack_init:1493 i=7, addr=c0000038
ip_conntrack_init:1493 i=8, addr=c0000040
ip_conntrack_init:1493 i=9, addr=c0000048
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Root-NFS: Mounting /nfsroot on server 192.168.2.2 as root
Root-NFS: rsize = 4096, wsize = 4096, timeo = 7, retrans = 3
Root-NFS: acreg (min,max) = (3,60), acdir (min,max) = (30,60)
Root-NFS: nfsd port = -1, mountd port = 0, flags = 00000200
Looking up port of RPC 100003/2 on 192.168.2.2
portmap: server 192.168.2.2 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Root-NFS: Portmapper on server returned 2049 as nfsd port
Looking up port of RPC 100005/1 on 192.168.2.2
portmap: server 192.168.2.2 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
Root-NFS: mountd port is 627
NFS: nfs_mount(c0a80202:/nfsroot)
mount: server 192.168.2.2 not responding, timed out
Root-NFS: Server returned error -5 while mounting /nfsroot
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
if anybody is able to help, please...
