Hello:

After flashing WRT54GL with my customized openwrt firmware. I can ping to it. But, when i telnet to it, i have following output:

telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.

So, i don't see busybox ash. can anybody please tell me what is the problem. i tried to reflash through tftp, but it seems boot_wait is not set. bootloader just load bad firmware that i installed. however, i have set boot_time/wait (i dont remember exactly).  when i switch to failsafe mode and ping and i have TTL=64 , and tried to tftp origional firmware but in vain.

Any good tips to recover from it please?