Hi all,
I am compling OpenWrt and testing mini-pci cards .Everything works ok on build 33867.
After upgrade to trunk version pci card is detected on the bus not enabled.
I am testing on Ubiquiti RouterStation and Compex WP546 board both has the same problem.
Regards,
Marcio
Topic: mini-pci problem
The content of this topic has been archived on 7 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
FYI: I have ubiquiti rs and found that the mini-pci slots only work with radios. They will not work with say a sata controller. It seems as though some of the support needed for the sata type of devices was left out of the hardware implementation.
Perazim
The discussion might have continued from here.
Page 1 of 1