The content of this topic has been archived on 17 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi all
I have this board, Hackberry A10, here details
I want install openwrt on this dev-board... What to do:
Arm SoC A10 is not present in wiki:platforms therefore, i need to add SoC kernel source to openwr? right?
I have found this:
-How to compile the Allwinner A10 Linux Kernel LINK
- Wiki Allwinner LINK
Tip/Help for me, Thanks
(Last edited by dk_giuse89 on 11 Nov 2012, 19:06)
Hi.
have you already gotten the openwrt trunk source?
https://dev.openwrt.org/wiki/GetSource
Many samples in it. Like this,
https://dev.openwrt.org/browser/trunk/target/linux
It's nice to run openwrt on A10.
good luck!
..
have you already gotten the openwrt trunk source?
...
Yes, but i don't know how to implement A10 kernel source with openwrt source... 
(Last edited by dk_giuse89 on 10 Nov 2012, 14:17)
Hey guys news help??? Pls
Following this document, at paragraph "Adding support for a new target" i found some details generic...
Next step:
Create dir in target/linux/<my target> and definite here all rule?
The big problem with a10 based devices is its poor mainlining status, it would require quite extensive patchsets for kernel (3.0) and u-boot to get the basics working (even ignoring the display related stuff).
The discussion might have continued from here.