I tried to follow the instructions as described above. It was partly successful but the device wouldn't reboot. I waited a good 15-20 minutes before I pulled the power supply to the device and then re powered it, but it started asking me for a network passcode. I tried the previous one before flashing the device but unfortunately it did not work. I reset the device like 5 times now with absolutely no luck. The device is alright and the wifi signal is available and all but I need the network password to connect to it. I'd really be thankful if you could suggest me some solution to get this device working again.
I noticed that when I reset the device the led flashes 3 times and then later it glows and then it stops for a brief moment and then glows back again.
Update: I connected locally through lan and I could change the settings. The default password is '2FDFB822'. Thanks a lot for the wonderful work. Forever grateful.
I have the same above problem but couldn't even get to the settings page through lan, it was 192.168.1.253 but not anymore and not 192.168.0.254 either. I tried that default password '2FDFB822' mentioned above but obviously it's not the same for all devices.
Appreciate if somebody can help.
I apologize for the late reply. Did you try connecting to lan through a different system? I would suggest you try that method because that is how I got it to work?