The content of this topic has been archived on 4 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi,
device will not boot after firmware update.
Only the power LED lights.
192.168.1.1 or 192.168.0.1 are no longer accessible.
Via DHCP I get 169.254.x.x, 255.255.0.0.
How do I get the original firmware back onto the device?
What can I do?
Trashing?
Thank you!!
exactly what hw version you have (label on the bottom), and what image did you flash (link!!)??
Hi,
here is the link:
http://jnjn.homepc.it:10581/files/downl … actory.rar
Model is TL-WR841ND Ver 8.1
From the post at the end of the page.
https://forum.openwrt.org/viewtopic.php … mp;login=1
Please help!
Thx
why you used a custom image?? also, read this??
https://forum.openwrt.org/viewtopic.php … 56#p180456
and this
https://forum.openwrt.org/viewtopic.php … 39#p182539
only way to recover is connect a ttl serial cable.. you will find instructions in wiki 
(Last edited by nebbia88 on 23 Dec 2012, 19:56)
The discussion might have continued from here.