Hi,all:
recently,i installed openwrt (version:attitude adjustment r33444) to my router(tp-link 741nd v4),and set lan ip to 192.168.1.1 and wan ip to 192.168.2.1.When i ping 192.168.2.1 and 192.168.1.1 from wan direction ,it could both be successful!!!Also i ping 192.168.2.1 and 192.168.1.1 from lan1 direction,but i found that i can only ping 192.168.2.1 successfully.Other ports(lan2\lan3\lan4) are normal, and i can sure i haven't do anything else settings.
It seems like wan port and lan1 port have switched their functions.Anyone else can give help?Thanks!!!
Topic: Why openwrt recognized wan port to lan port
The content of this topic has been archived on 30 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1