The content of this topic has been archived on 20 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello there,
I got a stable environment on which I want to configure WPA2 Enterprise on one of my ssids.
Does anyone know what I need to change in order to point my TPLink WR1043ND SSID=Internal to a Radius server?
I also need to set up the shared secret between the client and the server.
Any feedback will be much appreciated.
Anyone out there who can point me in the right direction?
I just want 1 of my ssids to be set up as a radius client so all users wireless computers(laptops) will be directed to my radius server configured on a windows machine. I got the following set up:
option key kangeroetjes
option encryption wpa2
option server 192.168.10.3
option port 1812
option eap_type tls
Once I restart the network server with: /etc/init.d/network restart
I get the following errors:
Configuration file: /var/run/hostapd-phy-0.conf
Line 57: unknow configuration item 'auth_server_addr'
Line 58: unknow configuraiton item 'auth_server_port'
Line 59: unknown configuration item 'auth_server_shared_secrect'
Any help will be much appreciated.
Thanks for the reply robthebrew,
However, I am using OPKG and not IPKG.
Can you please assist me with the settings as I am pretty new to this and I already read a couple of manuals which didn't work ( for me ).
Thanks in advance.
I want to configure WPA2 Enterprise on one of my ssids.
(Last edited by Ovi33123 on 7 Apr 2013, 19:02)
The discussion might have continued from here.