The content of this topic has been archived on 14 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hello I'm looking for if it is possible to install openwrt on a dlink DFL-500?
thank you for your help
This is a clone of the FortiGate 50A
Thank you
processor: - X86 Core General Purpose PC Compatible System - on - Chip - STMicroelectronics
(Last edited by thierry69 on 19 Mar 2013, 18:39)
this is the boot (via serial) :
FGT-50(02.28.2002)
Ver:02060000
SerialNum:FGT-502802027564
SDRAM Initialization
Scanning PCI Bus...Done.
Total RAM: 63M
Enabling Cache...Done.
Allocating PCI Resources...Done.
Zeroing IRQ Settings...Done.
Checking IRQ Routing Tables...Done.
Enabling Interrupts...Done.
Boot Up, Boot Device Capacity=30MB.
Press Any Key To Download Boot Image.
......
Reading Boot Image 977242 Bytes.
Initializing Firewall ...
Initializing eth0, MAC:00:05:5D:EF:66:6A
Initializing eth1, MAC:00:05:5D:EF:66:6B
2 interface(s) initialized
Test program loading(51,Build049,May 25 2005 15:40:38) ...
Starting test 51......
Test Begin at UTC Time Mon Apr 10 19:21:49 2006
Model Name: [FGT-50]
Unit BIOS Version: [02060000]
Unit Fortinet SN: [FGT-502802027564]
Unit OEM SN: [FGT-502802027564]
Unit First MAC: []
BIOS Integrity Check PASS.
Checking PCI devices...
PCI devices check PASS.
Gathering system information......
Gathering system information OK!
Verify system con
Verify system configuartion PASS
1. System information
model name : Cx486DX2
CPU number : 1
CPU MIPS : 52
Compact Flash : SanDisk SDCFB-32
size : 30 MB
Total Memory : 61912 KB
Total 2 net port(s) found.
internal(eth0) macaddress: 00:05:5D:EF:66:6A
external(eth1) macaddress: 00:05:5D:EF:66:6B
2. Memory test
Free memory is 26480KB.
pagesize=4096, pagesizemask=FFFFF000
Detecting memory(24MB)... [Done, 24MB will be tested]
STRESS->MEM-> 1.Stuck Address...
STRESS->MEM-> 1.Stuck Address PASSED.
STRESS->MEM-> 2.Random value...
STRESS->MEM-> 2.Random value PASSED.
STRESS->MEM-> 3.XOR comparison...
STRESS->MEM-> 3.XOR comparison PASSED.
STRESS->MEM-> 4.SUB comparison...
STRESS->MEM-> 4.SUB comparison PASSED.
STRESS->MEM-> 5.MUL comparison...
STRESS->MEM-> 5.MUL comparison PASSED.
STRESS->MEM-> 6.DIV comparison...
STRESS->MEM-> 6.DIV comparison PASSED.
STRESS->MEM-> 7.OR comparison...
STRESS->MEM-> 7.OR comparison PASSED.
STRESS->MEM-> 8.AND comparison...
STRESS->MEM-> 8.AND comparison PASSED.
STRESS->MEM-> 9.Sequential Increment...
STRESS->MEM-> 9.Sequential Increment PASSED.
STRESS->MEM-> Round 0 completed in 0 seconds (0 errors).
Release memory done.
3. CPU test OK !
Free memory is 26672KB.
4. Stream test
23182848 bytes memory will be covered.
vvvvvvvvvv
Function Rate (MB/s) RMS time Min time Max time
Copy: 27.6006 0.5600 0.5600 0.5601
Scale: 26.2948 0.5881 0.5878 0.5895
Add: 28.4456 0.8151 0.8150 0.8153
Triad: 25.2488 0.9184 0.9182 0.9196
5. Test ASIC DES Encrypt and Decrypt.
ASIC-F32 Check OK!
Encrypt data using ASIC Triple DES......
First 44 bytes of the text:
[The quick fox jumps over the lazy brown dog.]
First 44 bytes of cipher-text(HEX):
4a 8b 6d 8f b9 02 e1 a8 f4 12 c7 da 6d 97 e7 d2
1b 3b 2e 04 b9 a1 76 f0 ff b5 53 83 c7 d0 68 87
49 9c 45 b0 d6 be e0 c6 80 00 bf af
Decrypt data using ASIC Triple DES......
First 44 bytes of the reverse-cipher-text:
[The quick fox jumps over the lazy brown dog.]
Encrypt/Decrypt data using ASIC Triple-DES PASS.
6. Test Compact Flash and Harddisk.
Compact Flash(/dev/hda) Model:SanDisk SDCFB-32
Size:32112640(bytes)
Testing write/read to compact flash(/dev/hda):
vvvvvvv
Read/write test PASS. Write/Read Rate: 0.79MBPS/ 1.30MBPS
7. Test Network interface controller.
Wire the network ports as follow for NIC loopback test.
[INTERNAL] [EXTERNAL]
+ +
+----------+
Initializing eth0, MAC:00:05:5D:EF:66:6
Initializing eth1, MAC:00:05:5D:EF:66:6B
2 interface(s) initialized.
Try to start netbt device...
<3>Total 0 pairs configurated.
Start NETBT device failed.
Network traffic test between internal and external: FAILED
Test End at UTC Time Mon Apr 10 19:25:29 2006
Elapsed Time: 220 Seconds(3m40s).
============== Fortinet Hardware Quick Inspection Report ==================
BIOS Integrity Check: PASS
PCI Device Check: PASS
System Configuration Verification: PASS
Memory Test: PASS
CPU Test: PASS
CPU/MEM Performance Test: PASS
FortiASIC Device Test: PASS
IDE Test: PASS
Network Controller Test: FAIL
============== Fortinet Hardware Quick Inspection FAILED ==================
Network Controller Test requires loopback cables.
Failure on this test may be caused by bad cable or poor connection.
Check wirings before taking further actions.
The discussion might have continued from here.