The content of this topic has been archived on 23 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Dear Sir / Madam,
I have connected some external hardware to one of the GPIO inputs of my TP-Link MR-3020.
When I loose AC power at home, and power is restored again, the input is at one time engaged and the router is entering failsafe mode.
I would like to change the triggering condition of failsafe mode, say for example to a procedure of five clicks in one second so that the trigger pattern will be more specific.
Is there a way to do this?
I appreciate your help.
Thanks,
Edward
Any body can help me with this topic please?
Just edit the script files controlling the failsafe entrance to suit your needs.
https://dev.openwrt.org/browser/trunk/p … tc/preinit
https://dev.openwrt.org/browser/trunk/p … lsafe_wait
In the live system /etc/preinit and files in /lib/preinit
EDIT:
you might also read this thread: https://forum.openwrt.org/viewtopic.php?id=42424
(Last edited by hnyman on 17 Apr 2013, 21:25)
The discussion might have continued from here.