Its part of my logread:

Jan  1 00:52:20 OpenWrt daemon.info pppd[3797]: Plugin pppoatm.so loaded.
Jan  1 00:52:20 OpenWrt daemon.info pppd[3797]: PPPoATM plugin_init
Jan  1 00:52:20 OpenWrt daemon.info pppd[3797]: PPPoATM setdevname_pppoatm - SUCCESS:0.35
Jan  1 00:52:20 OpenWrt daemon.notice pppd[3797]: pppd 2.4.5 started by root, uid 0
Jan  1 00:52:20 OpenWrt daemon.info pppd[3797]: Using interface pppoa-wan
Jan  1 00:52:20 OpenWrt daemon.notice pppd[3797]: Connect: pppoa-wan <--> 0.35
Jan  1 00:52:50 OpenWrt daemon.warn pppd[3797]: LCP: timeout sending Config-Requests
Jan  1 00:52:50 OpenWrt daemon.notice pppd[3797]: Connection terminated.
Jan  1 00:52:50 OpenWrt daemon.notice pppd[3797]: Modem hangup
Jan  1 00:52:50 OpenWrt daemon.info pppd[3797]: Exit.
Jan  1 00:52:50 OpenWrt daemon.notice netifd: Interface 'wan' is now down 

And there is my config (network):

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ifname 'eth0.1'

config switch
        option name 'eth0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'eth0'
        option vlan '1'
        option ports '4 3 2 1 5t'

config adsl-device 'adsl'
        option fwannex 'a'
        option annex 'auto'

config atm-bridge 'atm'
        option unit '0'
        option encaps 'llc'
        option payload 'bridged'

config interface 'wan'
        option username 'xxxxxxxx@neostrada.pl'
        option password 'xxxxxxxx'
        option proto 'pppoa'
        option vpi '0'
        option vci '35'
        option ifname 'ppp0'
        option encaps 'vc'

What is wrong ? Why its not working ?
Please Help smile

(Last edited by amikot on 7 Jun 2013, 17:17)