OpenWrt Forum Archive

Topic: WGR614v3 support?

The content of this topic has been archived on 31 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Egg
17 Feb 2006, 08:49

I looked around the forum and found 5 threads, only 1 was relevant to the v3 and it was from 6 months ago.
Is there support, partial or experimental for this unit? I noticed that it needs a hex inverter for the serial port
so I will be picking one up. If a developer wants the unit it could be pried out of my hands. It has a Marvel switch (88E6060), 64mbit (8MB) ram (IS42S16400A-7T) and a flash I could not find the specs for (MX 29LV160ABTC-90)

Egg

Post #2
Ydef
22 Feb 2006, 02:25

How is this different from the wgr614v4 , which netgear does supply source for and also uses the marvel chip?

The discussion might have continued from here.