The content of this topic has been archived on 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi gurus.
Just upflashed my e3200 with openwrt-e3200_v1-squashfs.bin
Router starts, works approx. 2 mins and goes to reboot.
Telnet is accessible. Ssh is accessible after changing password. WebGUI not.
Hard reset, clear nvram, 30/30/30 does not help.
I suggest i have to use JTag procedure.
Maybe somebody know the workaround?
Same thing if you put it in failsafe?
I am in Failsafe.
What is the action plan? Where to see why my router malfunctioning?
In FS mode i have tried to download origin image...router begins to download and hangs.
I suppose - any CPU\LAN activities hangs the OS and goes to reboot.
The discussion might have continued from here.