The content of this topic has been archived on 6 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hey Comunity,
i am trying to get a huawei E3131 running on the router(topic).
usb_modeswitch switches him to 12d1:14db after connecting(logread).
But he gets not a ttyUSB under /dev, did someone make it happen with the E3131 under OpenWRT or have any ideas which could help?
What information do you need?
Thanks and Best Regards
Janky
(Last edited by Janky on 12 Sep 2013, 10:16)
so i figured something out at startup the usb-serial is not loaded, after i load it with insmod usbserial its the stick appears as ttyUSB0.
Its in the /etc/modules.d, how can it be that its not working / where to look for erros?
now its working device pops up under /dev.
So Standard apn doesn´t work with telekom sim. 
thanks and regards
janky
(Last edited by Janky on 12 Sep 2013, 16:18)
Hi
I am working on AP135 board recently I have downloaded code and I flashed in to the board
I am able to access the internet in android mobile by connecting to the Ap openwrt
but if I am trying to connect my laptop
It is connecting to the openwrt but internet is not coming
I tried with static ip also but no use
Kindly give me any suggestions
what could be the problem
The discussion might have continued from here.