Hi all,

I created a stronswan roadwarior config based on this howto article from wiki, but I cannot connect to it using windows. I tried SHREK VPN Client (maybe i'm missing smth in configuration - it's too complex), default windows client... There is no problem with Andriod - I set it up and was connected within maybe 2 minutes. Can anyone help me please? Windows says err 13806: IKE failed to find valid machine certificate. Contact your Network Security Administrator about installing a valid certificate in the appropriate Certificate Store. -  log from openwrt follows:

Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[NET] received packet: from 195.91.8.181[500] to 109.230.33.39[500] (528 bytes)
Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[ENC] parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) ]
Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[IKE] 195.91.8.181 is initiating an IKE_SA
Thu Dec 26 22:21:38 2013 authpriv.info syslog: 02[IKE] 195.91.8.181 is initiating an IKE_SA
Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[IKE] remote host is behind NAT
Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[IKE] sending cert request for "C=SK, O=WNDR3700, CN=PhSnake"
Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[ENC] generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(MULT_AUTH) ]
Thu Dec 26 22:21:38 2013 daemon.info syslog: 02[NET] sending packet: from 109.230.33.39[500] to 195.91.8.181[500] (333 bytes)

(Last edited by PhSnake on 26 Dec 2013, 22:56)