The content of this topic has been archived on 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi there,
I would like to know if its possible (and if so, could you point me in the right direction) to host multiple simultaneus PPPOE sessions on OpenWRT. I would like to play around with routing - ie. route certain ranges through a different account - but I first need to sort out the PPPOE Sessions. I have searched the forum, but have not found what I am looking for just yet.
Your help is greatly appreciated.
SlayerBeast
bump 
You should be able to do it if you setup separate vlans, one for each eth connection which goes to a pppoe device. I have two internet connections, one through cable and one through ADSL with pppoe. What I did is setup cable as wan, on the usual vlan1, and setup an additional port, vlan2, and configure wan2 as pppoe on vlan2. I think you should be able to do something similar if you setup more vlans and point each wan setup to a different vlan.
The discussion might have continued from here.