OpenWrt Forum Archive

Topic: Bricked TP-Link WR-1043ND V2? HELP!

The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Franksterz_ehv
7 Mar 2014, 22:25

Hello all,

First i want to apologize for my bad english.
Today i've uploaded some OpenWRT to my TP-Link WR-1043ND V2.
Firmware upgrade succesfully!
After that, i can't get into my router.
Not on 192.168.1.1
When i connect wired, i get internet, but still can't get into the menu.
Please help me!
Hopely it isn't bricked.
I've uploaded; Trunk (Barrier Breaker)
From: http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd (did the v2 version upgrade!)

Hope someone can help me!

Thanks!

Post #3
Boompje123
10 Mar 2014, 15:29

Trunk doesnt come with Luci (the web interface).

Follow the link nebbia posted

1) log in with telnet, set password
2) log in with SSH using the password you set
3) install luci:
opkg update
opkg install luci
/etc/init.d/uhttpd start
/etc/init.d/uhttpd enable

The discussion might have continued from here.