swrt-2017-04-10
---------------
While there was progress on the O_TMPFILE issue wrt ubifs, a complete fix is
still missing, so carry over the disable O_TMPFILE support patch.
Mamba uses internet as label for the INTERNET port unlike the others which use
wan, sent a patch out to get this discussed upstream. Waiting for a final
verdict here. For the time being use "wan" for all. For Mamba users this means
you have to replace internet with wan in your network configuration if you
don't use the default one (generated during first boot).
Also dropped the pxa-nand patch in next only. This branch is for testing. So if
the issue is still reproducible get a log from a recent kernel which would help
to revive the issue upstream.
Then as promised a couple version bumps. Changes to kernel configuration,
namely disable the RTC and enable MMC support. Additionally the firmware
packages and drivers for the sd8887 so those who wish to play with it can do
so. That said an improved dts is slowly taking shape but not yet ready for
prime time. Also add the mwlwifi firmware packages meant to be used with the
in-kernel driver in future and which were the occasion to package the former.
next-20170406+ fail to build due to btrfs commits, to be able to do a release
today I used next-20170405, will look into the issue later.
A few packages always fail to build, as it seems standard to feed install all
packages and not just those people care about, I changed the build_dist script
to ignore errors for packages which wont get included in the image when
--build-packages is given.
* linux-4.10: bump to 4.10.9
* linux-4.11: bump 4.11-rc6
* linux-next: bump to next-20170405
* libnftnl: version bump to 1.0.7
* nftables: version bump to 0.7
* iproute2: version bump to 4.10.0, vanillify a bit
* ubox: version bump to 2017-03-10
* linux-firmware: bump to 2017-01-13
* mwlwifi-88W8864-firmware: add package
* mwlwifi-88W8897-firmware: add package
* marvell-sd8887-firmware: add package
* kmod-btmrvl: add module
* kmod-btmrvl-sdio: add module
* kmod-net-mwifiex: add module
* kmod-net-mwifiex-sdio: add module
* profile: add sd8887 firmware to default packages
* kernel-config: disable RTC support, doesn't work for this boards and some
doggy software appears to have issues with that.
* kernel-config: enable MMC subsystem and driver
* kernel,DSA; use wan for all
* linux-next: drop pxa-nand patch
* swrt/README: a couple updates
* swrt/build_dist.bash: ignore errors for packages not part of the image,
simplifies the use of --build-packages
swrt-2017-04-10.tar.xz: https://gpldr.in/v/o4vzW2qot7/ekXMKs3IWZDvIeyX
sha256sum: 9eaf704169323798635ca0b2fbc6964dcabb065c14cb4eddd653258f01c81f70