BusyBox v1.00-rc3 (2004.10.01-08:17+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M

root@OpenWrt:/# wl curpower
User Target:              31.75 dB
Regulatory Max:           63.00 dB
Regulatory Constraint:     0.00 dB
Current Limit:            21.00 dB

----------------------------------------------------

1.can anybody tell me which is the default Tx-Power of the latest OpenWRT firmware (if you don't change it)?
2.can anybody calculate from the above values the Tx-Power i'm using now?

Thanx a lot.

30mW  is about 15db
67mW is about 18dB

every 3dB will roughly double the output power.

thanx but this wasn't my question.
so i'm asking again.

1.can anybody tell me which is the default Tx-Power of the latest OpenWRT firmware (if you don't change it)?
2.can anybody calculate from the above values the Tx-Power i'm using now?

1.- IIRC 28mW (maybe 29)
2.- 84mW

thanx coder.
can you give the formula to calculate it myself?

is it the "User Target: 31.75 dB" that we care about?