The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I have tried all firmwares from http://wiki.openwrt.org/toh/tp-link/tl-wr841nd#serial, but all failed with error code 18000 (Updating failed)
Does openwrt support this version of router (TP-LINK WR841N v11.0)?
(Last edited by gbstack08 on 10 Jun 2014, 12:52)
Not according to the wiki.
can you open the case and post some hi-res pics of the board?
Hi-Res from Chinese forum
http://forum.eepw.com.cn/thread/252111/1
It says that v11 use
"CPU是QCA9533，内存是Zentel A3S64D40GTP，容量8MByte， Flash是winbond 25Q80BV"
CPU: QCA9533
RAM: Zentel A3S64D40GTP
Flash: winbond 25Q80BV
(Last edited by 27-34nm on 13 Jan 2015, 15:17)
There is only 1MB (8Mbit) ROM on board which has no hope to run openwrt.
Check W25Q80BVxxIG in
http://www.winbond.com/NR/rdonlyres/EE3 … 013014.pdf
The discussion might have continued from here.