The content of this topic has been archived on 16 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Can anyone tell me what image i should use for a rt5350f the router is a chinese hx702n that i have upgraded the flash to 4mb from 2mb and the ram from 16mb to 32mb. i know i will have to flash it with my programmer and change the uboot image but i am not having much luck finding a firmware bin for the rt5350f.
thanks
May be you should see this page for hlk-rm04 module it uses the same SoC with 4MB Flash and 16M RAM
http://wiki.openwrt.org/toh/hilink/hlk-rm04
Try this one:
https://forum.openwrt.org/viewtopic.php?id=48481
The discussion might have continued from here.