Reseting NVRAM by pressing reset button during power on, has always worked for me with older hardware releases. Now, i testing WRT54GL with custom whiterussian RC5 build, and have no effect to NVRAM at all. By holding reset button down, wrt54gl start like always and does not going even to failsafe mode. Can't see any difference in serial console either. If i press reset, when DMZ led turns on, then failsafe mode works like expected. Erasing NVRAM must be bootloader's job, so probably i can't blame my OpenWRT build. Can anybody confirm, is this feature or bug of wrt54gl's.
Topic: reset NVRAM and WRT54GL
The content of this topic has been archived on 20 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
hmm,
so nobody has never reset NRAM, with reset button on WRT54GL?
The discussion might have continued from here.
Page 1 of 1