TP-LINK WR842nd v2
BB rc03
Scanner Agfa SnapScan e50.
Connect to usb-hab.
If I run saned -d (manually start in ssh console):
root@OpenWrt:~# saned -d
[saned] main: starting debug mode (level 2)
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.24 starting up
[saned] do_bindings: [1] bind failed: Address already in use
[saned] check_host: access by remote host: ::ffff:192.168.1.167  -start xsane or skanlite on client
[saned] init: access granted to pas@::ffff:192.168.1.167
[snapscan] Scanner warming up - waiting 16 seconds. - start preview scan
Segmentation fault - in xsane or skanlite on client full picture in preview window, but controls are not active.

If manually start in ssh console:
root@OpenWrt:~# scanimage -v -d snapscan:libusb:001:007 --format=pnm --resolution 300 --mode Lineart --quality-cal=no -l 10 -t 0 -x 140 -y 215 > /dev/null
scanimage: scanning image of size 1648x2539 pixels at 1 bits/pixel
scanimage: acquiring gray frame
Segmentation fault

How to fix it?
PS: my system gentoo on desktop computer and Ubuntu 12.04 on notebook

excuse my bad english

(Last edited by porotkin on 16 Aug 2014, 20:52)