Topic: dsl-3780 cpu info

The content of this topic has been archived on 6 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

francisuk

24 Aug 2014, 18:54

For anyone who wonts this info of the CPU/RAM, Heres it is for feature ref.

http://www.mediatek.com/en/products/con … i/rt63365/

using PuTTy and if I select 192.168.1.1 and Telnet to port 22.

# cat /proc/cpuinfo
system type : Ralink RT63365 SOC
processor : 0
cpu model : MIPS 34K V5.5
BogoMIPS : 465.30
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16 dsp mt
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
unaligned accesses : 106114016

processor : 1
cpu model : MIPS 34K V5.5
BogoMIPS : 349.79
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16 dsp mt
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
unaligned accesses : 106114016

processor : 2
cpu model : MIPS 34K V5.5
BogoMIPS : 349.79
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16 dsp mt
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
unaligned accesses : 106114016

processor : 3
cpu model : MIPS 34K V5.5
BogoMIPS : 348.97
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16 dsp mt
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
unaligned accesses : 106114016

# uname-a
-sh: uname-a: not found
# echo"$PATH"
-sh: echo/userfs/bin:/usr/sbin:/bin:/usr/bin:/sbin: not found

# # echo "$PATH"
# /bin:/sbin:/usr/bin
-sh: /bin:/sbin:/usr/bin: not found
# #
# ls /bin
ash dd grep ln mv pwd tar
busybox dmesg gunzip login netstat rm true
cat echo gzip ls pidof rmdir umount
chmod egrep hostname mkdir ping sed uname
cp false ip more ping6 sh usleep
date fgrep kill mount ps sleep zcat

# ls /bin
zebra swapdev printserver ln ebtables cat
wpsd startbsp pppc klog dns busybox
wlancmd sntp ping kill dms brctl
web smbpasswd ntfs-3g iwpriv dhcps atserver
usbserver smbd nmbd iwconfig dhcpc atmcmd
usbmount sleep netstat iptables ddnsc atcmd
upnp siproxd mount ipp date at
upg sh mldproxy ipcheck cwmp ash
umount scanner mknod ip cp adslcmd
tr111 rm mkdir igmpproxy console acl
tr064 ripd mii_mgr hw_nat cms ac
telnetd reg mic ethcmd cli
tc radvdump ls equipcmd chown
switch ps log echo chmod
# ls /sbin
vconfig rmmod poweroff init halt
route reboot insmod ifconfig arp
# ls /usr/bin
wget top test mcast ftpput [[
traceroute tftp telnet killall ftpget [
#

(Last edited by francisuk on 24 Aug 2014, 18:57)

Post #2

corruptor1972

4 Aug 2015, 21:10

A little bit more about this router, which I understand was made by D-Link exclusively for Talk:Talk -

On the face of it, the fact that it already runs a distribution of Linux might make it a good candidate for OpenWRT:

# more /etc/fwTCver.conf
TCLinux Fw #7.3.37.6

more /proc/version
Linux version 2.6.22.15 (root@bb2.compile.host) (gcc version 4.3.4 (GCC) ) #6 SMP Mon Oct 8 09:43:44 CST 2012

This file looks as if it could be interesting:

/etc/RT30xxEEPROM.bin

# more /etc/dms_device.cfg
Manufacturer="DLink"
ManufacturerUrl="www.dlink.com"
ModelDescription="D-Link DSL-3780 DMS"
ModelName="DSL-3780 DMS"
ModelNumber="1.0"
ModelUrl="www.dlink.com"
SerialNumber="DMS-001"

# more /etc/xml/WFADeviceDesc.xml 
<?xml version="1.0" encoding="utf-8"?>
<root xmlns="urn:schemas-upnp-org:device-1-0">
  <specVersion>
    <major>1</major>
    <minor>0</minor>
  </specVersion>
  <device>
    <deviceType>urn:schemas-wifialliance-org:device:WFADevice:1</deviceType>
    <friendlyName>DSL-3780</friendlyName>
    <manufacturer>Ralink Technology, Corp.</manufacturer>
    <manufacturerURL>http://www.ralinktech.com.tw</manufacturerURL>
    <modelDescription>Ralink AP WSC device</modelDescription>
    <modelName>Ralink Wireless Access Point</modelName>
    <modelNumber>RT2561</modelNumber>
    <modelURL>http://www.ralinktech.com.tw</modelURL>
    <serialNumber>12345678</serialNumber>
    <UDN>uuid:Upnp-WSC-1_0-1234567890001</UDN>
    <serviceList>
      <service>
        <serviceType>urn:schemas-wifialliance-org:service:WFAWLANConfig:1</serviceType>
        <serviceId>urn:wifialliance-org:serviceId:WFAWLANConfig1</serviceId>
        <SCPDURL>WFAWLANConfigSCPD.xml</SCPDURL>
        <controlURL>control</controlURL>
        <eventSubURL>event</eventSubURL>
      </service>
    </serviceList>
  </device>
</root>

# more /proc/modules
ipt_REDIRECT 1664 2 - Live 0xc01bf000
iptable_filter 2304 1 - Live 0xc01c8000
hw_nat 59472 0 - Live 0xc01e7000 (P)
mldsnooping 6976 0 - Live 0xc011c000
igmpsnoop 16192 0 - Live 0xc01cc000
ebt_ip6 3360 2 - Live 0xc01c3000
ebt_ip 2688 12 - Live 0xc01c1000
ebtable_filter 1920 1 - Live 0xc0075000
ebtables 23456 3 ebt_ip6,ebt_ip,ebtable_filter, Live 0xc0132000
sch_prio 5760 2 - Live 0xc00be000
sch_htb 18912 0 - Live 0xc013a000
cls_fw 4992 2 - Live 0xc0119000
act_mirred 4624 2 - Live 0xc00c1000
rt5390ap 882944 1 - Live 0xc0343000 (P)
tc3162_dmt 935168 0 [permanent], Live 0xc025d000 (P)
tc3162l2sar 74032 2 - Live 0xc0105000 (P)
raeth 70880 2 tc3162_dmt,tc3162l2sar, Live 0xc011f000 (P)
tccicmd 90144 4 rt5390ap,tc3162_dmt,tc3162l2sar,raeth, Live 0xc00db000 (P)
tcledctrl 22016 4 rt5390ap,tc3162l2sar,raeth,tccicmd, Live 0xc00c8000 (P)
usblp 12032 0 - Live 0xc00c4000
uvcvideo 65920 0 - Live 0xc00f3000
usbvideo 26736 0 - Live 0xc009f000
videodev 45056 2 uvcvideo,usbvideo, Live 0xc00cf000
v4l1_compat 15888 2 uvcvideo,videodev, Live 0xc0096000
ppp_async 11248 0 - Live 0xc009b000
crc_ccitt 1824 1 ppp_async, Live 0xc003e000
option 6448 1 tcledctrl, Live 0xc000c000
usbserial 29376 1 option, Live 0xc00b5000
fuse 47440 0 - Live 0xc00a8000
usb_storage 30512 0 - Live 0xc0035000
ehci_hcd 35312 0 - Live 0xc001d000
ohci_hcd 22128 0 - Live 0xc002e000
usbcore 118032 9 usblp,uvcvideo,usbvideo,option,usbserial,usb_storage,ehci_hcd,ohci_hcd, Live 0xc0057000
nls_cp936 121184 0 - Live 0xc0077000
nls_utf8 1472 0 - Live 0xc0015000
sd_mod 23280 0 - Live 0xc0027000
scsi_wait_scan 864 0 - Live 0xc0013000
scsi_mod 89408 3 usb_storage,sd_mod,scsi_wait_scan, Live 0xc0040000
brg_shortcut 6032 0 - Live 0xc0002000 (P)
tcvlantag 11968 0 - Live 0xc0019000
tcportbind 5072 0 - Live 0xc0009000
tcsmux 11376 0 - Live 0xc000f000
module_sel 2240 4 rt5390ap,tcvlantag,tcportbind,tcsmux, Live 0xc0007000 (P)
tcfullcone 3120 0 - Live 0xc0005000

# ls /proc/tc3162
Prio_Enable                       led_ppp
Prio_Voip_Rxport                  led_usb
adsl_cwmp_diagnostic0             led_wps
adsl_cwmp_diagnostic1             mac_esd_check
adsl_cwmp_diagnostic2             oam_ping
adsl_cwmp_diagnostic3             reset_button
adsl_cwmp_diagnostic4             stag_to_vtag
adsl_cwmp_diagnostic5             support_flash
adsl_cwmp_diagnostic6             sys_has_hwnat
adsl_fwver                        sys_has_usb_device
adsl_perf                         sys_has_usbhost
adsl_stas_curdaySt                sys_has_wifi
adsl_stas_intervaldaySt           tcci_cmd
adsl_stas_last                    tcconsole_timeout
adsl_stas_prevdaySt               tcqos_disc
adsl_stas_quthourSt               tcsupport_adslinfo
adsl_stas_show                    tsarm_ccdescr
adsl_stas_total                   tsarm_debug
adsl_stats                        tsarm_pktsclear
ahb_status                        tsarm_pvc
atm_f5_loopback_diagnostic        tsarm_pvc_del
atm_f5_loopback_diagnostic_reset  tsarm_pvc_info
automount_pid                     tsarm_pvc_pid
autopvc                           tsarm_qosred
autopvc_fin                       tsarm_qosred_update
button_type                       tsarm_qoswrr
dbg_msg                           tsarm_questats
eth1_link_st                      tsarm_reset
eth1_qoswrr                       tsarm_rxdescr
eth1_tcqos_disc                   tsarm_stats
eth_link_st                       tsarm_txdescr
eth_port_status                   tsarm_vc0
eth_portmap                       tsarm_vc1
eth_ports                         tsarm_vc2
eth_reg                           tsarm_vc3
eth_rxring                        tsarm_vc4
eth_stats                         tsarm_vc5
eth_txring0                       tsarm_vc6
eth_txring1                       tsarm_vc7
eth_txring2                       untag_vlan_filter
eth_txring3                       usb_ports
gButtonCheck                      usb_serial_status
gsw_link_st                       vlan_tag_sw
gsw_stats                         wan_ports
igmpsnooping_eth_port_stat        wlan_button
led_def                           wlan_ports
led_dsl                           wps20_button
led_internet                      wps_button
led_power

# cat /proc/meminfo
MemTotal:        61396 kB
MemFree:         35208 kB
Buffers:          1720 kB
Cached:           8592 kB
SwapCached:          0 kB
Active:           8476 kB
Inactive:         6256 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        4452 kB
Mapped:           3560 kB
Slab:             6508 kB
SReclaimable:      984 kB
SUnreclaim:       5524 kB
PageTables:        388 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     30696 kB
Committed_AS:     8776 kB
VmallocTotal:  1048308 kB
VmallocUsed:      3976 kB
VmallocChunk:  1044100 kB
IMEM Remains: 4294965224 Bytes

# cat iomem
00000000-03ffffff : System RAM
  00020000-002b8817 : Kernel code
  002b8818-0034019f : Kernel data
1fba0000-1fbaffff : rt3xxx-ohci
  1fba0000-1fbaffff : ohci_hcd
1fbb0000-1fbbffff : rt3xxx-ehci
  1fbb0000-1fbbffff : ehci_hcd
20000000-2fffffff : pcie memory space
  20000000-200fffff : PCI Bus #01
    20000000-2000ffff : 0000:01:00.0
      20000000-2000ffff : 0000:01:00.0

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00010000 00010000 "bootloader"
mtd1: 00010000 00010000 "romfile"
mtd2: 00114177 00010000 "kernel"
mtd3: 005eb000 00010000 "rootfs"
mtd4: 00fa0000 00010000 "tclinux"
mtd5: 00040000 00010000 "reservearea"

# uname -a
Linux tc 2.6.22.15 #6 SMP Mon Oct 8 09:43:44 CST 2012 mips unknown

(Last edited by corruptor1972 on 4 Jan 2016, 21:10)

Post #3

corruptor1972

10 Aug 2015, 21:29

Seeing as I cannot add to the Table of Hardware in the OpenWRT site, I hope that somebody who can will read this and do it for me. Here are some images of the router: Front, Rear and Circuit Board. Please do the honourable thing and credit me though... :-)

To open the case cleanly, first wedge off the two rubber feet and then unscrew the two screws concealed beneath. Carefully, using a plastic implement, work your way around the case, unsnapping the front from the body.

The following hyperlinks lead to photographic images of the router.

Front View

Rear View
Connectors

Power: 12V/1A adapter-in-a-plug
USB: USB2 socket
Fibre: 1 x 10/100 Fast Ethernet socket
LAN1 ... LAN4: 4 x 10/100 Fast Ethernet sockets
Reset: Reset button (to factory settings)
ADSL: ADSL2+ socket

Circuit Board
Unfortunately the large heatsink in the centre is soldered on to the circuit board and, because I lack the correct tools, I am unwilling to remove it.

(Last edited by corruptor1972 on 4 Jan 2016, 20:57)

Post #4

corruptor1972

4 Jan 2016, 20:47

Sooooo... a visit to the D-link web site turned up some interesting results...

I found router source code labelled as for the DSL-3780, published here.

I could not find the DSL-3780 in any search results or in the list, BUT the DSL-3680 source is labelled as, 'GPL: DSL-3780 B1 F/W v1.04t (for TT)'

So perhaps two birds might be able to be killed with the one stone :-)

The source for Kernel 2.6.22.15 can be found here. So asking, 'what's the difference?' might be one way of approaching this...

Being a firmware rookie I could use some help... :-)

I have posted on the hardware hacking forum which appears to be a more appropriate place for this discussion to continue

(Last edited by corruptor1972 on 4 Jan 2016, 21:38)

Post #5

tmo26

4 Jan 2016, 21:27

I recommend adding this device to wikidevi:
https://wikidevi.com/wiki/Special:FormE … k_DSL-3780

Please try first if the creation of the page really works, before entering large amounts of data.
If you encounter problems: https://wikidevi.com/wiki/Special:Contact

Post #6

corruptor1972

4 Jan 2016, 21:55

Thanks for the link, tmo26. I encountered problems and e-mailed as you advised.

Update: I have tried several times to contact the WikiDev people but no reply and my issue is still not fixed. I tried the updates in IE, Firefox & Chrome, both logged in and logged out, but each time I faced the message, 'Update Failed.'

(Last edited by corruptor1972 on 3 Apr 2016, 20:34)

Post #7

corruptor1972

22 Mar 2017, 21:36

OK so I threw it in to a corner for a long time and then came back to it.

The pinouts for the Serial Connectors are as per the D-Link DSL 3680:

How to connect to the Serial Port of this specific device:

JP1 pinout, 3.3V serial 115,200baud 8N1

[x] : TX 
[x] : GND 
[x] : VCC 3.3V 
[ ] 
[x] : RX

Here's the boot sequence from the terminal output:

RT63365 at Wed Feb 22 09:30:43 CST 2012 version 1.04

Memory size 64MB

flash base: b0000000
Found SPI Flash 16MiB MX25L12805D at 0xb0000000

Search PHY addr and found PHY addr=0
Press any key in 3 secs to enter boot command mode.
............................................................

Decompress to 80020000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
Uncompressing [LZMA] ...  done.
Linux version 2.6.22.15 (root@bb2.compile.host) (gcc version 4.3.4 (GCC) ) #6 SM                                          P Mon Oct 8 09:43:44 CST 2012
ISPRAM0: PA=002b0000,Size=00008000,enabled
Enable SRAM=1c000001
Ralink RT63365 SOC prom init
CPU revision is: 00019555
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
3 available secondary CPU TC(s)
Built 1 zonelists.  Total pages: 16256
Kernel command line: console=ttyS0 rootfstype=squashfs es=1
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (23 instructions).
Synthesized TLB load handler fastpath (37 instructions).
Synthesized TLB store handler fastpath (37 instructions).
Synthesized TLB modify handler fastpath (36 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU frequency 699.00 MHz
Using 250.000 MHz high precision timer.
console handover: boot [early0] -> real [ttyS0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61184k/65536k available (2658k kernel code, 4296k reserved, 542k data, 1                                          56k init, 0k highmem)
SLUB: Genslabs=17, HWalign=32, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Mount-cache hash table entries: 512
34K sync es set to 1.
Config7: 0x80080500
FPU Affinity set after 1548 emulations
Limit of 4 TCs set
TLB of 64 entry pairs shared by 2 VPEs
VPE 0: TC 0 1 2, VPE 1: TC 3
IPI buffer pool of 32 buffers
CPU revision is: 00019555
TC 1 going on-line as CPU 1
CPU revision is: 00019555
TC 2 going on-line as CPU 2
CPU revision is: 00019555
TC 3 going on-line as CPU 3
Brought up 4 CPUs
migration_cost=10000
NET: Registered protocol family 16
RT63368_pcie_init
registering PCI controller with io_map_base unset
PCI: Bridge: 0000:00:00.0
  IO window: disabled.
  MEM window: 20000000-200fffff
  PREFETCH window: disabled.
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 24576 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TC3162 hardware watchdog module loaded.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
NTFS driver 2.1.28 [Flags: R/O].
io scheduler noop registered (default)
ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
IMQ starting with 2 devices...
IMQ driver loaded successfully.
        Hooking IMQ after NAT on PREROUTING.
        Hooking IMQ before NAT on POSTROUTING.
tc3162: flash device 0x01000000 at 0x10000000
tc3162: Found SPIFLASH 16MiB MX25L12805D
Creating 6 MTD partitions on "tc3162":
0x00000000-0x00010000 : "bootloader"
0x00010000-0x00020000 : "romfile"
0x00020000-0x00134177 : "kernel"
mtd: partition "kernel" doesn't end on an erase block -- force read-only
0x00134177-0x0071f177 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o                                          nly
0x00020000-0x00fc0000 : "tclinux"
0x00fc0000-0x01000000 : "reservearea"
Undefined Manufactor ID and Devcie ID
nandflash_probe: nand flash setup flash info and opcode fail
RT3xxx EHCI/OHCI init.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
nf_conntrack_rtsp v0.6.21 loading
xt_time: kernel timezone is -0000
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 156k freed
busybox init and set aff
init started:  BusyBox v1.00 (2012.10.08-01:46+0000) multi-call binary
init started:  BusyBox v1.00 (2012.10.08-01:46+0000) multi-call binary
Starting pid 129, console /dev/ttyS0: '/usr/etc/init.d/rcS'
chmod: /userfs/profile.cfg: Read-only file system

tcfullcone version: tcfullcone V1.1.0.0 (Feb 13 2012-20:16:35).
module_sel: module license 'unspecified' taints kernel.

tcsmux version: tcsmux V1.1.0.0 (Feb 13 2012-20:16:37).

tcportbind version: tcportbind V1.1.0.0 (Feb 13 2012-20:16:38).
vlantag_drv_init
TCSUPPORT_IPV6
TCSUPPORT_USBHOST
SCSI subsystem initialized
insmod: cannot open module `/lib/modules/usbhost/nls_base.ko': No such file or d                                          irectory
insmod: cannot open module `/lib/modules/usbhost/fat.ko': No such file or direct                                          ory
insmod: cannot open module `/lib/modules/usbhost/vfat.ko': No such file or direc                                          tory
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 1
rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x1fba0000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
VendorId 0 ProductID 0
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 2
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x1fbb0000
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
VendorId 0 ProductID 0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
fuse init (API version 7.8)
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-                                          port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
TC3162 LED Manager 0.1 init

tcledctrl version: tcledctrl V1.1.0.0 (Oct  8 2012-09:44:22).
tccicmd V1.1.0.0 (Oct  8 2012-09:44:24)
the number of cfg node is 70
portbind_init
autopvc_init
logAccess_init LanguageSwitch_init vendorCfgFile_init The number of cache node i                                          s 5
Check romfile pass!
mtd[readflash]:device=reservearea tclen=65536 tcoffset=0
Unlocking reservearea ...
Reading from reservearea to /tmp/tc_backupromfile ...
[BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 65536 0 reserve                                          area

 goto wlan_write!!
wlan_write---goto fopen 1 4!!
WPSActiveStatus = NULL
WPSOOBActive = NULL
ReCounterActive = NULL
WPSGenPinCode = NULL
###enter write_wlan_coutry,defcountry=UNITED KINGDOM###
mtd[readflash]:device=reservearea ###enter readinf,readinf=UNITED KINGDOM

########
###enter write_wlan_country,defcountry=UNITED KINGDOM,str=UNITED KINGDOM###
###enter write_wlan_countryregion=0
###enter write_wlan_country,str=UNITED KINGDOM###
###enter write_wlan_uptime,uptime=946684804###
###enter write_wlan_ssid,tmp=TNET2###
###enter write_wlan_wpapsk,tmp=diaz48sjt72jkt76###
###enter write_wlan_ssid,tmp=Ralink_AP2###

wlan_write---goto fopen wpsstatus 0!!
ra0       no###enter write_wlan_ssid,tmp=Ralink_AP3###

wlan_write---goto fopen wpsstatus 0!!
ra0       no ###enter write_wlan_ssid,tmp=Ralink_AP4###

wlan_write---goto fopen wpsstatus 0!!
ra0       no private ioctls.

mtd[readflash]:device=reservearea tclen=512 tcoffset=196608
Unlocking reservearea ...
Reading from reservearea to /tmp/RT30xxEEPROM.bin ...
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=0.0.0.0
ip=66.220.2.74
ip=66.220.2.74
sslca_write:get Frag Number failed!
dms:get new Lan ipaddr 192.168.1.2
/usr/script/samba.sh: 39: ntlm: not found
/usr/script/samba.sh: 40: client: not found
/usr/script/samba.sh: 41: client: not found
startsmbfilepwent_internal: file /etc/samba/smbpasswd did not exist. File succes                                          sfully created.
The attribute is not in wifiMACTab
ifconfig: ppp8: error fetching interface information: Device not found

ifconfig: ppp8: error fetching interface information:
lanHost_read: Create node LanHost !
Cannot find device "br0"
insmod raeth driver
femac.c:v1.00-NAPI 29.Mar.2011
eth0: FE MAC Ethernet address: 78:54:2E:4C:6A:D8
TSARM: TC3162 ATM SAR driver 1.5 init

tc3162sar V1.2.0.0 (Oct  8 2012-09:44:21)
register autopvc cmd to sys
TSARM: TC3162 ATM SAR driver 1.5 done
route: fscanf
ADSL DMT initialization starting
Begin AdslTaskInit.....
End AdslTaskInit
Begin to  request IRQ 20
DMT:Succeed to request IRQ 20
Initializing ADSL F/W 3.20.21.0 ......
Reset dmt
Check DMT version =b2 ........
Initializing ADSL F/W ........ done
ADSL HW version: b2, HCLK 233
route: fscanf
route: fscanf
TCSUPPORT_WLAN
TCSUPPORT_WLAN_RT5392
The remaining IMEM space cannot accommodate section .text.imem !!
Remaining IMEM space: -2072 bytes       Section Size: 728 bytes
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Mirror/redirect action on
route: fscanf
Ebtables v2.0 registered
igmpsnoop V1.1.0.0 (Sep 23 2012-14:30:55)

mldsnooping V1.1.0.0 (Feb 13 2012-20:16:36)
eth0: starting interface.
alloc_sram p=bc000800 free=7800
alloc_sram p=bc002800 free=5800
TC2105MJ, <6>Ralink HW NAT Module Enabled
device eth0 entered promiscuous mode
TCSUPPORT_WLAN: ifconfig
up right away
now bb MainSsid mac 78:54:2e:4c:6a:d8
0x1300 = 00064380
jiffies=ffff9175, POLLING_MODE_DETECT_INTV=300
device ra0 entered promiscuous mode
TCSUPPORT_WLAN_WDS
TC3162 hardware watchdog initialized
telnetd: starting
  port: 23; login program: /bin/login
SSH
Ethernet Media-Type Support
four ports

Enabling SSL security system
SSL security system enabled[01/Jan/2000:00:00:17 +0000] boa: server version Boa/0.94.13
[01/Jan/2000:00:00:17 +0000] boa: server built Oct  8 2012 at 09:48:29.
[01/Jan/2000:00:00:17 +0000] boa: starting server pid=671, port 80
SIOCGIFFLAGS: No such device
interface eth0.1 does not exist!
sh: vconfig: not found
SIOCGIFFLAGS: No such device
interface eth0.2 does not exist!
sh: vconfig: not found
SIOCGIFFLAGS: No such device
interface eth0.3 does not exist!
sh: vconfig: not found
SIOCGIFFLAGS: No such device
interface eth0.4 does not exist!
sh: vconfig: not found
SIOCGIFFLAGS: No such device
interface eth0.5 does not exist!
sh: vconfig: not found
SIOCGIFFLAGS: No such device
interface eth0.6 does not exist!
sh: vconfig: not found
device eth0 is already a member of a bridge; can't enslave it to bridge br0.
Added VLAN with VID == 1 to IF -:eth0:-
WARNING:  VLAN 1 does not work with many switches,
consider another number if <7>ehth0.1: add 33:33:00:00:00:01 mcast address to master interface
Added VLAN with VID == 2 to IF -:eth0:-
Added VLAN with VID == 3 to IF -:eth0:-
Added VLAN with VID == 4 to IF -:eth0:-
device eth0 left promiscuous mode
br0: port 1(eth0) entering disabled state

 ========FirmVer DSL-3780 FTTxv1.04t

 ========FirmVer DSL-3780 FTTxv1.04t
========================insmod iptable_filter=======================
chmod: /userfs/profile.cfg: Read-only file system
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp0.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp1.conf
Plugin libpppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:0.38
Options file - /etc/ppp/options.0.38.
sh: /sbin/modprobe: not found
qos.rxtp.traffic_class = 1
qos.txtp.pcr = qos.rxtp.pcr = 0
RFC1483/2684 bridge: Interface "nas1" created sucessfully

RFC1483/2684 bridge: Communicating over ATM 0.0.65, encapsulation: LLC

qos.txtp.traffic_class = 1
RFC1483/2684 bridge: Interface configured
RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started

Using interface ppp0
Connect: ppp0 <--> 0.38
Cannot find device "nas0"
Action 4 device imq0 ifindex 2
Cannot find device "nas0"
device nas1 entered promiscuous mode
Action 4 device imq0 ifindex 2
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp2.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp3.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp4.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp5.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp6.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp7.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_0.conf

==>Error, socket or ioctl error for mulifctl
SIOCSIFHWADDR: No such device
SIOCSIFADDR: No such device
interface nas8_0 does not exist!
Cannot find device "nas8_0"
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_1.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_2.conf
Action 4 device imq0 ifindex 2
Cannot find device "nas8_0"
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_3.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_4.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_5.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_6.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp8_7.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_0.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_1.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_2.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_3.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_4.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_5.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_6.conf
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
/etc/isp9_7.conf
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_0.conf
device nas10_0 entered promiscuous mode
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_1.conf
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_2.conf
Action 4 device imq0 ifindex 2
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_3.conf
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_4.conf
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_5.conf
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_6.conf
ifconfig: invalid hw-addr 00:12:34:56:78:
/etc/isp10_7.conf
br0: port 7(nas10_0) entering learning state
br0: port 1(nas1) entering learning state
br0: port 6(eth0.4) entering learning state
br0: port 5(eth0.3) entering learning state
br0: port 4(eth0.2) entering learning state
br0: port 3(eth0.1) entering learning state
br0: port 2(ra0) entering learning state
br0: topology change detected, propagating
br0: port 7(nas10_0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(nas1) entering forwarding state
br0: topology change detected, propagating
br0: port 6(eth0.4) entering forwarding state
br0: topology change detected, propagating
br0: port 5(eth0.3) entering forwarding state
br0: topology change detected, propagating
br0: port 4(eth0.2) entering forwarding state
br0: topology change detected, propagating
br0: port 3(eth0.1) entering forwarding state
br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
Radvd function activated!
Enter set first loop, IP addr by radvd
sh: /tmp/del_radvd_prefix.sh: not found
dhcp6s parameter activated by exec!
Enter set first loop, IP addr by Dhcp6s
sh: /tmp/del_dhcp6s_prefix.sh: not found
killall: dropbear: no process killed
radvd starting
read WLAN driver from rt_device success!
killall: wscd: no process killed
killall: rtdot1xd: no process killed
Ralink DOT1X daemon, version = '2.5.0.0'
connect[radius]: Network is unreachable
connect[radius]: Network is unreachable
connect[radius]: Network is unreachable
connect[radius]: Network is unreachable
[DOT1X] Radius_client_init : no any auth RADIUS socket ready
[DOT1X] RADIUS client initialization failed.
iptables: Bad rule (does a matching rule exist in that chain?)
ANNEXAIJLM

Enter cwmp boot, we will start tr69 Process
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
/etc/lanAlias0.conf
=== alpha_syslog_execute in ===
killall: syslogd: no process killed
/usr/script/alpha_syslogd.sh  san done
killall: klogd: no process killed
<5>Linux version 2.6.22.15 (root@bb2.compile.host) (gcc version 4.3.4 (GCC) ) #6 SMP Mon Oct 8 09:43:44 CST 2012
<6>ISPRAM0: PA=002b0000,Size=00008000,enabled
<4>Enable SRAM=1c000001
<4>Ralink RT63365 SOC prom init
<4>CPU revision is: 00019555
<4>Determined physical RAM map:
<4> memory: 04000000 @ 00000000 (usable)
<7>On node 0 totalpages: 16384
<7>  Normal zone: 128 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 16256 pages, LIFO batch:3
<4>3 available secondary CPU TC(s)
<4>Built 1 zonelists.  Total pages: 16256
<5>Kernel command line: console=ttyS0 rootfstype=squashfs es=1
<4>Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
<4>Primary data cache 32kB, 4-way, linesize 32 bytes.
<6>Synthesized TLB refill handler (23 instructions).
<6>Synthesized TLB load handler fastpath (37 instructions).
<6>Synthesized TLB store handler fastpath (37 instructions).
<6>Synthesized TLB modify handler fastpath (36 instructions).
<6>Cache parity protection disabled
<4>PID hash table entries: 256 (order: 8, 1024 bytes)
<4>CPU frequency 699.00 MHz
<4>Using 250.000 MHz high precision timer.
<6>console handover: boot [early0] -> real [ttyS0]
<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Memory: 61184k/65536k available (2658k kernel code, 4296k reserved, 542k data, 156k init, 0k highmem)
<6>SLUB: Genslabs=17, HWalign=32, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
<7>Calibrating delay loop... 465.30 BogoMIPS (lpj=2326528)
<4>Mount-cache hash table entries: 512
<4>34K sync es set to 1.
<4>Config7: 0x80080500
<4>FPU Affinity set after 1548 emulations
<4>Limit of 4 TCs set
<4>TLB of 64 entry pairs shared by 2 VPEs
<4>VPE 0: TC 0 1 2, VPE 1: TC 3
<4>IPI buffer pool of 32 buffers
<4>CPU revision is: 00019555
<7>Calibrating delay loop... 349.79 BogoMIPS (lpj=1748992)
<4>TC 1 going on-line as CPU 1
<4>CPU revision is: 00019555
<7>Calibrating delay loop... 349.79 BogoMIPS (lpj=1748992)
<4>TC 2 going on-line as CPU 2
<4>CPU revision is: 00019555
<7>Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896)
<4>TC 3 going on-line as CPU 3
<6>Brought up 4 CPUs
<4>migration_cost=10000
<6>NET: Registered protocol family 16
<4>RT63368_pcie_init
<4>registering PCI controller with io_map_base unset
<6>PCI: Bridge: 0000:00:00.0
<6>  IO window: disabled.
<6>  MEM window: 20000000-200fffff
<6>  PREFETCH window: disabled.
<4>PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
<7>PCI: Setting latency timer of device 0000:00:00.0 to 64
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<6>NET: Registered protocol family 2
<6>Time: MIPS clocksource has been installed.
<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>TCP established hash table entries: 2048 (order: 2, 24576 bytes)
<4>TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
<6>TCP reno registered
<4>TC3162 hardware watchdog module loaded.
<6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>NTFS driver 2.1.28 [Flags: R/O].
<6>io scheduler noop registered (default)
<6>ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>NET: Registered protocol family 24
<6>IMQ starting with 2 devices...
<6>IMQ driver loaded successfully.
<6>     Hooking IMQ after NAT on PREROUTING.
<6>     Hooking IMQ before NAT on POSTROUTING.
<4>tc3162: flash device 0x01000000 at 0x10000000
<6>tc3162: Found SPIFLASH 16MiB MX25L12805D
<5>Creating 6 MTD partitions on "tc3162":
<5>0x00000000-0x00010000 : "bootloader"
<5>0x00010000-0x00020000 : "romfile"
<5>0x00020000-0x00134177 : "kernel"
<4>mtd: partition "kernel" doesn't end on an erase block -- force read-only
<5>0x00134177-0x0071f177 : "rootfs"
<4>mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
<5>0x00020000-0x00fc0000 : "tclinux"
<5>0x00fc0000-0x01000000 : "reservearea"
<4>Undefined Manufactor ID and Devcie ID
<4>nandflash_probe: nand flash setup flash info and opcode fail
<4>RT3xxx EHCI/OHCI init.
<4>Netfilter messages via NETLINK v0.30.
<4>nf_conntrack version 0.5.0 (512 buckets, 4096 max)
<4>ctnetlink v0.93: registering with nfnetlink.
<4>nf_conntrack_rtsp v0.6.21 loading
<6>xt_time: kernel timezone is -0000
<4>nf_nat_rtsp v0.6.21 loading
<4>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>All bugs added by David S. Miller <davem@redhat.com>
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Freeing unused kernel memory: 156k freed
<4>
<4>tcfullcone version: tcfullcone V1.1.0.0 (Feb 13 2012-20:16:35).
<4>module_sel: module license 'unspecified' taints kernel.
<4>
<4>tcsmux version: tcsmux V1.1.0.0 (Feb 13 2012-20:16:37).
<4>
<4>tcportbind version: tcportbind V1.1.0.0 (Feb 13 2012-20:16:38).
<4>vlantag_drv_init
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<6>rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
<6>rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 1
<6>rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x1fba0000
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<4>VendorId 0 ProductID 0
<6>rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
<6>rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 2
<6>rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x1fbb0000
<6>rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<4>VendorId 0 ProductID 0
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<4>fuse init (API version 7.8)
<6>usbcore: registered new interface driver usbserial
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>drivers/usb/serial/usb-serial.c: USB Serial Driver core
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
<6>Linux video capture interface: v2.00
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v0.1.0)
<6>usbcore: registered new interface driver usblp
<6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
<4>TC3162 LED Manager 0.1 init
<4>
<4>tcledctrl version: tcledctrl V1.1.0.0 (Oct  8 2012-09:44:22).
<4>tccicmd V1.1.0.0 (Oct  8 2012-09:44:24)
<4>the number of cfg node is 70
<4>portbind_init
<4>autopvc_init
<4>logAccess_init LanguageSwitch_init vendorCfgFile_init The number of cache node is 5
<4>
<4> goto wlan_write!!
<4>wlan_write---goto fopen 1 4!!
<4>WPSActiveStatus = NULL
<4>WPSOOBActive = NULL
<4>ReCounterActive = NULL
<4>WPSGenPinCode = NULL
<4>###enter write_wlan_coutry,defcountry=UNITED KINGDOM###
<4>###enter readinf,readinf=UNITED KINGDOM
<4>
<4>########
<4>###enter write_wlan_country,defcountry=UNITED KINGDOM,str=UNITED KINGDOM###
<4>###enter write_wlan_countryregion=0
<4>###enter write_wlan_country,str=UNITED KINGDOM###
<4>###enter write_wlan_uptime,uptime=946684804###
<4>###enter write_wlan_ssid,tmp=TNET2###
<4>###enter write_wlan_wpapsk,tmp=diaz48sjt72jkt76###
<4>###enter write_wlan_ssid,tmp=Ralink_AP2###
<4>
<4>wlan_write---goto fopen wpsstatus 0!!
<4>###enter write_wlan_ssid,tmp=Ralink_AP3###
<4>
<4>wlan_write---goto fopen wpsstatus 0!!
<4>###enter write_wlan_ssid,tmp=Ralink_AP4###
<4>
<4>wlan_write---goto fopen wpsstatus 0!!
<4>sslca_write:get Frag Number failed!
<4>dms:get new Lan ipaddr 192.168.1.2
<4>The attribute is not in wifiMACTab
<4>
<4>lanHost_read: Create node LanHost !
<6>femac.c:v1.00-NAPI 29.Mar.2011
<6>eth0: FE MAC Ethernet address: 78:54:2E:4C:6A:D8
<4>TSARM: TC3162 ATM SAR driver 1.5 init
<4>
<4>tc3162sar V1.2.0.0 (Oct  8 2012-09:44:21)
<4>register autopvc cmd to sys
<4>TSARM: TC3162 ATM SAR driver 1.5 done
<4>ADSL DMT initialization starting
<4>Begin AdslTaskInit.....
<4>End AdslTaskInit
<4>Begin to  request IRQ 20
<4>DMT:Succeed to request IRQ 20
<4>Initializing ADSL F/W 3.20.21.0 ......
<4>Reset dmt
<4>Check DMT version =b2 ........
<4>Initializing ADSL F/W ........ done
<4>ADSL HW version: b2, HCLK 233
<4>The remaining IMEM space cannot accommodate section .text.imem !!
<4>Remaining IMEM space: -2072 bytes    Section Size: 728 bytes
<4>PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
<7>PCI: Setting latency timer of device 0000:01:00.0 to 64
<4>Mirror/redirect action on
<5>Ebtables v2.0 registered
<4>igmpsnoop V1.1.0.0 (Sep 23 2012-14:30:55)
<4>
<4>mldsnooping V1.1.0.0 (Feb 13 2012-20:16:36)
<6>eth0: starting interface.
<4>alloc_sram p=bc000800 free=7800
<4>alloc_sram p=bc002800 free=5800
<4>TC2105MJ, <6>Ralink HW NAT Module Enabled
<6>device eth0 entered promiscuous mode
<4>up right away
<4>now bb MainSsid mac 78:54:2e:4c:6a:d8
<4>0x1300 = 00064380
<4>jiffies=ffff9175, POLLING_MODE_DETECT_INTV=300
<6>device ra0 entered promiscuous mode
<4>TC3162 hardware watchdog initialized
<4>
<4>Enabling SSL security system
<4>SSL security system enabled<7>eth0.1: add 33:33:00:00:00:01 mcast address to master interface
<7>eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
<7>eth0.2: add 33:33:00:00:00:01 mcast address to master interface
<7>eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
<7>eth0.3: add 33:33:00:00:00:01 mcast address to master interface
<7>eth0.3: add 01:00:5e:00:00:01 mcast address to master interface
<7>eth0.4: add 33:33:00:00:00:01 mcast address to master interface
<7>eth0.4: add 01:00:5e:00:00:01 mcast address to master interface
<6>device eth0 left promiscuous mode
<6>br0: port 1(eth0) entering disabled state
<4>
<4> ========FirmVer DSL-3780 FTTxv1.04t
<4>
<4> ========FirmVer DSL-3780 FTTxv1.04t
<4>========================insmod iptable_filter=======================
<6>device nas1 entered promiscuous mode
<6>device nas10_0 entered promiscuous mode
<6>br0: port 7(nas10_0) entering learning state
<6>br0: port 1(nas1) entering learning state
<6>br0: port 6(eth0.4) entering learning state
<6>br0: port 5(eth0.3) entering learning state
<6>br0: port 4(eth0.2) entering learning state
<6>br0: port 3(eth0.1) entering learning state
<6>br0: port 2(ra0) entering learning state
<6>br0: topology change detected, propagating
<6>br0: port 7(nas10_0) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 1(nas1) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 6(eth0.4) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 5(eth0.3) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 4(eth0.2) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 3(eth0.1) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 2(ra0) entering forwarding state
<4>Radvd function activated!
<4>Enter set first loop, IP addr by radvd
<4>dhcp6s parameter activated by exec!
<4>Enter set first loop, IP addr by Dhcp6s
<4>read WLAN driver from rt_device success!
<4>ANNEXAIJLM
<4>
<4>Enter cwmp boot, we will start tr69 Process
<4>=== alpha_syslog_execute in ===
<4>/usr/script/alpha_syslogd.sh  san done
ftp switch turn on
<7>nas1: no IPv6 routers present
sip switch turn on
h323 switch turn on
rtsp switch turn on
l2tp switch turn on
ipsec switch turn on
Cannot find device "6rd"
SIOCGIFFLAGS: No such device
ioctl: No such device
Parental Control: parental_execute() Enter.
<4>Parental Control: parental_execute() Enter.
sip switch turn off
00:00:32 INFO:siproxd.c:180 siproxd-0.5.12-3541 mips-unknown-linux-gnu starting up
largeD flag=2 (0:maxD=64, 1:maxD=128, 2:maxD=511)
<4>largeD flag=2 (0:maxD=64, 1:maxD=128, 2:maxDTestlab 26
<4>Testlab 26
==>getMacEntryByIndex(): no sta existance
==>getMacEntryByIndex(): no sta existance
==>getMacEntryByIndex(): no sta existance
==>getMacEntryByIndex(): no sta existance
iptables: No chain/target/match by that name
<7>nas10_0: no IPv6 routers present
Daemon Successfully forked (pid: 2762)
<7>nas10: no IPv6 routers present

Please press Enter to activate this console. ThreadedTimerCheck: get last for first time

Starting pid 2783, console /dev/ttyS0: '/sbin/getty'

tc login:

Post #8

amartinwest

12 Feb 2018, 11:48

In the hardware list the support for the 3680 is stated as impossible but doesnt state why. Anyone recall why they thought it was impossible.

i have a 3780, which is very similar, that I have spare and wanted to install openwrt on it.

Thanks

Post #9

tmo26

12 Feb 2018, 12:24

amartinwest wrote:

In the hardware list the support for the 3680 is stated as impossible but doesnt state why. Anyone recall why they thought it was impossible.

16MB RAM of DSL-3680 is too little.

Post #10

corruptor1972

17 Feb 2018, 16:13

Sure, it may well be impossible for the 3680, but this is the 3780, which has 64MB RAM: It should be do-able with 64MB RAM given that the Netgear DGN-3500 (https://wiki.openwrt.org/toh/netgear/dgn3500b) also has 64MB RAM and, for many years now, has been able to run OpenWRT with LUCI.

I did open a post to call for help over at LEDE (https://forum.lede-project.org/t/d-link-dsl-3780/8750) and I have some resources linked to from that post, including images and source code. Maybe these will help someone either to help me to implement on the 3780, or to do it themselves... :-)

The discussion might have continued from here.

Page 1 of 1