Prompt ways to increase the flash memory on the MR3040 v2.3.
As I think there are 2 ways - add usb flash or new memory chip.
External usb I need to connect the usb modem. There are internal contacts usb or can forget about my idea?
Topic: MR3040 and expansion flash
The content of this topic has been archived on 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
USB hubs do exist. If you use a hub, you can easily increase the available memory with extroot. -> http://wiki.openwrt.org/doc/howto/extroot
That's way easier than replacing the flash ROM chip.
The discussion might have continued from here.
Page 1 of 1