Hey guys, I connected my r402m to my pc on ttl usb , but i cant get command line. Am i doing something wrong?
Topic: Tl-R402M Serial problem
The content of this topic has been archived on 20 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Make a closer and sharper photo from the lower left corner. It should display the tracks from the serial port to the CPU
Anyway, it seems to use the RTL8196 CPU, openwrt has poor support on that hardware.
It seems that the serial port isn't connected to the cpu.
Try this
The discussion might have continued from here.
Page 1 of 1