OpenWrt Forum Archive

Topic: ARCHER C7 v2 trunk release

The content of this topic has been archived on 24 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
sergiosatellite
26 Oct 2014, 10:34

Hello,
I compiled OpenWrt Chaos Calmer r43055 / LuCI Trunk (git-14.294.77948-ecb0c2f) for Archer C7 v2.
I used scripts made by hnyman for WNDR3700 with little changes.
I found following issues:
1. Radios were not detected at the boot. Had to force detecting again by:
    removing /etc/config/wireless file
    giving command "wifi detect > /etc/config/wireless"
    and it worked
2. wlan leds not working.

Does anybody have a solution for wlan leds?

Googoled and found that ticket #18188 by morfik was reporting how to get the wlan5g led working and the lack of triggering for wlan2g.
Waiting for ticket resolution.

Sergio

(Last edited by sergiosatellite on 26 Oct 2014, 12:10)

Post #2
mpeg3s
1 Dec 2014, 18:08

First, thanks to all for the support and development!

I own this router now and I haven't been able to get the USB Storage working with either NTFS or EXT4.

The Router see the storage, but it seems to be a format or compatibility issue. There are network links but all are empty. I have 2, 3, & 5TB Hard drives.

Mega Thanks!

Post #3
sergiosatellite
2 Dec 2014, 20:09

Don't thank me, I'm not a developer, I'm only a builder.
I do not have any experience of USB storage with this router.
In order to help I need you to let me know which kind of openwrt build you flashed.
Best regards

Sergio

mpeg3s wrote:

First, thanks to all for the support and development!

I own this router now and I haven't been able to get the USB Storage working with either NTFS or EXT4.

The Router see the storage, but it seems to be a format or compatibility issue. There are network links but all are empty. I have 2, 3, & 5TB Hard drives.

Mega Thanks!

(Last edited by sergiosatellite on 2 Dec 2014, 20:09)

The discussion might have continued from here.