OpenWrt Forum Archive

Topic: OpenWrt x86_64 does not recognize multi core Intel J1900 SMP CPU

The content of this topic has been archived on 23 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
peterwillcn
7 Dec 2014, 16:11

OpenWrt  x86_64 Chaos Calmer r43530 does not recognize multi core Intel J1900 SMP CPU and USB3.0

[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x2 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 2/0x4 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 3/0x6 ignored.

(Last edited by peterwillcn on 8 Dec 2014, 09:40)

Post #2
porjo
6 May 2017, 05:56

I'm seeing the same with a custom OpenWRT Chaos Calmer 15.05.1 build using all the latest packages.

Post #4
porjo
7 May 2017, 04:18

@maurer, thanks LEDE image works well!

Actually I didn't use the snapshot - just the stable release - it recognises all CPU cores plus the extra RAM (I have 2GB).

(Last edited by porjo on 7 May 2017, 22:58)

The discussion might have continued from here.