The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hi all
how to remotly upgrade router via wan interface ??
i've opened ssh port on my rc4 -> upload rc5 image -> do "mtd -e linux -r write image.trx linux" -> router reboots itself 
firewall goes to default settings so ssh on wan iface is cut and now i can't access the device 
ps. sry 4 my english
(Last edited by sioux on 27 Apr 2006, 10:55)
- In standard images, ssh is disabled until you set a password. The only way is telnet or http.
- However, access from wan is blocked so you have to go from LAN or WIFI.
- In standard images, ssh is disabled until you set a password. The only way is telnet or http.
- However, access from wan is blocked so you have to go from LAN or WIFI.
i know that already
i'm looking for how to do this remotly
i think you would have to compile your own image with the SDK to enable telnet and ssh on the wan side by default..... i think that would work
The discussion might have continued from here.