Good day!
Problem such: During the upgrade the original Firmware of the router TP-LINK TL-WDR4900 V1.3 European version, turn off the light at the substation and the router turned into a brick, had hoped that UPS will not be required but in vain (lights up only the power led, Reset, press and hold this button does not respond). Tell me where you can take Full Dump Flash file (16Mb) to the router TL-WDR4900 V1.3 (it is possible to reprogram the FLASH memory via SPI programmer TL-866). Tried to flash the firmware which is attached on the website (TL-WDR4900_V1_130424) with u-BOOT, the programmer TL-866 and with a starting address of 0xFF, but to no avail. Please help me with the full memory Dump.
Thank you.