Worked perfectly, thanks a lot!

Guys,
I'm all new to openwrt, I have a NEXX WT3020 and i don't want to brick it on the first attempt.

I'm probably reading to much and try to little, but the thing is this, I want it to be as perfect as possible so an U-boot with a webinterface would be very welcome!

My nexx still has the stock firmware, can i flash this uboot from the stock nexx webinterface or must i do it over telnet?  If possible, can someone who has the tools to unbrick, please give it a try.  It might save newcomers like a few headaches. I dont have tools to unbrick, i might order some once i know what to order but for now i will try to play things safe.

Thanks for the headups about the uboot.

From the r708, this is the prepadded file:

https://mega.co.nz/#!BQF02IqD!dqTmT-JGr … QJ1rmOCj7k

Who could update the wiki page to include this information? I've lost like 2 weeks looking for the reason it didn't boot.

> From the r708, this is the prepadded file:

Is it required to use a padded u-boot after all?

i'm currently running CCrc2 with the stock u-boot, so i don't think it is required.

> i'm currently running CCrc2 with the stock u-boot, so i don't think it is required.

Sorry I meant for non-stock u-boot. And the answers seems to be "no" since I can install unmodified breed directly on a factory WT3020.

Guys,

Be aware of ugly bugs when you consider install. I have bricked my first device following the "alternative way" instructions from the wiki. I had no tools to unbreak so I just bought two new devices. I managed to install CC-rc3  by upgrading to the Breed bootloader (r708)  without any padding from recovery console.

So I confirm that this bundle is save: bootloader, image. Use the malfi's method to install it.

Could someone more experienced (and with better English skills) update the wiki to not confuse the people?

I've successfully installed trunk on seven different WT3020's, but my first step is always to replace the U-boot with Breed in case something goes wrong.

(Last edited by roger_ on 24 Aug 2015, 21:45)

Does anyone know if the modified uboot will work with the Kingston MLWG2?

http://wiki.openwrt.org/toh/kingston/mlwg2

If so how do we determine which one to use?

+1 for this one !
I am considering a WT3020 to buy, too, but totally confused, what/how to do, to get and run openwrt on it.

Is this Breed version english?

I remember someone said Breed is (partly?) in an unknown language. 
And does anyone know if this can be trusted? Is the source available?

I hope hackpascal released the source.  He is nice enough to use the U-boot source, but yet not nice enough to share back.

no english version.
no sources.
not using(at least on words) u-boot source.

As the aforementioned breed file is not available anymore, I just wanted to let you know, that the following combination is working fine here too:

5c164e40aeb8b7b54775167d5888f85f  breed-mt7620-reset1.bin (r766 http://breed.hackpascal.net/r766%20%5b2015-09-21%5d/ )
cf5dc8d36425f035abcdd06780f40a2f  openwrt-15.05-ramips-mt7620-wt3020-8M-squashfs-sysupgrade.bin

and now he is disable the uboot console output , that i can not see the output file.

yes..and right now he is disable the uboot console output.. i think he is definitely use the uboot sources.and also yours.

I asked him for sources (at least for the version which is definitely based on U-Boot), but he didn't have even courage to answer me, so now I don't care anymore - wasting time on people who just don't get the idea about open source is... just wasting time.

Thanks for the update, I grabbed the latest r802 [2015-12-07] version and it worked like a treat. It is nice to know that I can always recover the router without a serial console even if the openwrt image breaks completely.

I'm not sure I agree with the decision somebody made to eliminate all traces of the breed firmware from the wt3020 wiki page. It is still the most robust solution for installing openwrt onto the wt3020. I do understand the GPL implications (and I would certainly not support the breed project monetarily or otherwise), but since the hackpascal guy is not making a profit on the uboot image, and nobody else came forward with a similar, but GPL-clean uboot image (actually, no one even bothered to integrate the openwrt failsafe patch in almost a year), the wiki should present all options to the users and let them decide which avenue to pursue.

(Last edited by falconwrt on 29 Dec 2015, 11:22)

That's a shame indeed. I had sent this to the mailing list almost a year ago but got zero reactions.
https://lists.openwrt.org/pipermail/ope … 31116.html

Submitted a patch following https://dev.openwrt.org/wiki/SubmittingPatches:
https://lists.openwrt.org/pipermail/ope … 38405.html

(Last edited by probono on 30 Dec 2015, 13:27)

Posted
https://lists.openwrt.org/pipermail/ope … 38405.html
and
https://lists.openwrt.org/pipermail/ope … 38623.html
but seems like these posts went entirely unnoticed. Is something wrong with them?

I'll mention here that trunk builds for the WT3020 are also broken: https://forum.openwrt.org/viewtopic.php?id=61672

i flash this firmware please help me password and username because admin/admin not run
i have nexx wt3020 f

(Last edited by copmeyill on 14 Feb 2016, 21:27)

Have you tried the ones from here:
https://wiki.openwrt.org/toh/nexx/wt3020

(none) login: nexxadmin
Password: y1n2inc.com0755

though i'm not sure if they do the trick

thnks @frietpan

connect success on telnet
and try this procedure
use putty http://www.putty.org/ for telnet connection and miniweb http://miniweb.sourceforge.net/ for http server
https://forum.openwrt.org/viewtopic.php … 85#p241085

----------------------
....
...
Unlocking mtd3 ...
then fail
----------------------

now nexx 3020 not blink blue red
no wifi signs no ethernet connection
offer any solition ?
I think I need cable usb/ttl cable
I ordered usb/ttl cable on aliexpress

(Last edited by copmeyill on 18 Feb 2016, 20:16)