Hi
wanted to know if it is possible to activate the wireless network via telnet it does not allow me to enter the web configuration problems ports
greeting
The content of this topic has been archived on 20 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi
wanted to know if it is possible to activate the wireless network via telnet it does not allow me to enter the web configuration problems ports
greeting
Telnet can use only first time (And WiFi did not enable by defaults), when you set the password, Telnet will not able to use it. You need to ssh.
The discussion might have continued from here.