Radicale CalDAV/CardDAV server version 0.10 is available as OpenWrt package.
Also available the corresponding LuCI application to easy configure the server.
For more details on Radicale server have a look at http://radicale.org/
Enjoy
Topic: Radicale CalDAV/CardDAV server availible as OpenWrt package
The content of this topic has been archived on 3 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hi Chris,
i am a beginer...
1, install radicale-py2, luci-app-radicale.
2, setup storage : /mnt/radicale
3, Authentication method :none
it works.
But if change Authentication method to htpasswd (plain, user1:passwrd1) it does not work.
Try w. thunderbird/lightning client:
add new caldav calendar ( Allowed 0 links. /user1:password1@'srv':5232/dan/calendar.ics )
Can You help me?
thx,
ddan
have you checked /etc/radicale/rights for the correct RegEx
try to increase loglevel and have a look into log
Otherwise you need to ask radicale forum for help
now:
1,
Authentication method to allow access to Radicale server.
Authentication method : htpasswd file
Encryption method: plain
htpasswd file : /etc/radicale/users
2, Rights
Full access for authenticated Users
3,
htpasswd file:
#
# Sample File
#
dani:dani
#user1:password1
#user2:password2
4,
Console Log level :debug
Syslog Log level:debug
File Log level:debug
5, log:
/var/log/radicale
thx,
dan
017-03-13 18:22:44,993 - DEBUG: Sanitized path: /aniko/calendar.ics/
2017-03-13 18:26:49,843 - INFO: Stopping Radicale
2017-03-13 18:26:49,844 - DEBUG: Closing server listening to wrt.lan port 5232
2017-03-13 18:26:50,252 - DEBUG: Cleaning up
2017-03-13 18:26:54,143 - INFO: Starting Radicale
2017-03-13 18:26:54,146 - DEBUG: Authentication type is htpasswd
2017-03-13 18:26:54,214 - DEBUG: Base URL prefix: /
2017-03-13 18:26:54,215 - DEBUG: Listening to wrt.lan port 5232
2017-03-13 18:26:54,216 - DEBUG: Radicale server ready
2017-03-13 18:31:07,019 - INFO: PROPFIND request at /aniko/calendar.ics/ received
2017-03-13 18:31:07,022 - DEBUG: Request headers:
log:
sorry, i can't put full log, because get a error:
Too more links in message. Allowed 0 links. Reduce number of links and post it again.
why?
hi,
how can i send log to you?
thx
ddan
Hi,
I'm very sorry but I cannot help on this.
Please ask Radicale Forum
The discussion might have continued from here.