Topic: TL-WR710N: Hornet USB booting ??

The content of this topic has been archived on 26 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

nowede

19 Sep 2015, 20:22

After my TL-WR710N has turned into a brick, I tried to bring it back to life.
Unfortunately there is only a short sequence on the console to be seen and uboot messages are not among them:

Hornet USB booting...
VID=0xcf3,PID=0x9330
iManufacturer=0x10,iProduct=0x20,iSerialNumber=0x30
bMaxPower=0xfa
-> COLD_START
bUSBPhyBias=0x3
RUN
Default State
HS
HS
HS
HS
HS

Here it stops and any input is ignored.

Any idea what this means and how to proceed here?
Thanks
Norbert

The discussion might have continued from here.

Page 1 of 1