I want to add support for my D-link dsr-100n in openwrt
it boots ok for now? but no leds work.

i tested it like described here http://wiki.openwrt.org/doc/devel/add.new.device the results are:

6- reset button
8 - wps button

all leds become lightning on 0 value and turns off at 1

GPIO - Led name

9 - USB1
10 - USB2
11 - WPS
14 - Powergreen
15 - powerorange

who can add some code? i newer write any good myself)))
i can provide any more information and test if needed!

(Last edited by smail on 25 Sep 2015, 13:15)

dsr-100n hardware:
CPU1: Cavium CN5010
FLAsh: 32 MiB
256 mb RAM
WIfi chip: Atheros AR9160
Switch: Broadcom BCM53115

default print env:

bootdelay=3
baudrate=115200
download_baudrate=115200
bootloader_flash_update=protect off $(uboot_flash_addr) +$(uboot_flash_size);erase $(uboot_flash_addr) +$(uboot_flash_size);cp.b $(fileaddr) $(uboot_flash_addr) $(uboot_flash_size);run nuke_env
burn_app=erase $(flash_unused_addr) +$(filesize);cp.b $(fileaddr) $(flash_unused_addr) $(filesize)
bf=bootoct $(flash_unused_addr) forceboot numcores=$(numcores)
nuke_env=protect off $(env_addr) +$(env_size); erase $(env_addr) +$(env_size)
linux_start=0xbdca0000
linux_limit=0xbf99ffff
linux_limit_old=0x1800000
linux_update=protect off $(linux_start) +$(linux_limit_old);erase $(linux_start) +$(linux_limit_old);cp.b $(fileaddr) $(linux_start) $(filesize)
flash_linux_boot=cp.b $(linux_start) $(loadaddr) $(linux_limit_old);bootoctlinux $(loadaddr);
boot_firm=cp.b $(linux_start) $(loadaddr) 0x900000;bootoctlinux 0xaa00200 mtdparts=phys_mapped_flash:640k(bootloader)ro,9M(kernel),20M(rootfs),2M(AppConfig),128k(bootload-env);
ls=fatls ide 0
autoload=n
autotest=1
ipaddr=192.168.1.1
serverip=192.168.1.100
ethact=octeth0
bootcmd=bootFirmware
firm_flash=erase BDCA0000 BF99FFFF; cp.b 0xaa00000 BDCA0000 1D00000
loadaddr=0xaa00000
numcores=1
stdin=serial
stdout=serial
stderr=serial
env_addr=0xbfbe0000
env_size=0x20000
flash_base_addr=0xbdc00000
flash_size=0x2000000
uboot_flash_addr=0xbdc40000
uboot_flash_size=0x60000
flash_unused_addr=0xbdca0000
flash_unused_size=0x1f40000

Environment size: 1424/131068 bytes

(Last edited by smail on 25 Sep 2015, 13:16)