ulmwind, I'm not so good in this so i don't know what you mean, sorry
This is my firewall config settings:
config redirect
option target 'DNAT'
option src 'wan'
option dest 'lan'
option proto 'udp'
option src_dport '1701'
option dest_port '1701'
option name 'IPSec'
option dest_ip '192.168.1.100'
config redirect
option target 'DNAT'
option src 'wan'
option dest 'lan'
option proto 'udp'
option src_dport '500'
option dest_ip '192.168.1.100'
option dest_port '500'
option name 'IPSec II'
config redirect
option target 'DNAT'
option src 'wan'
option dest 'lan'
option src_dport '4500'
option dest_ip '192.168.1.100'
option dest_port '4500'
option name 'IPSec III'
option proto 'tcp'
config rule
option src 'wan'
option dest 'lan'
option proto 'esp'
option target 'ACCEPT'
config rule
option src 'wan'
option dest 'lan'
option proto 'ah'
option target 'ACCEPT'
When i try to connect on my Windows computer, it gives me the follow:
A network connection between your computer at the VPN server was started, but the VPN connection was not completed. This is typically caused by the use of an incorrect or expired certificate for authentication between the client and the server. Please contact your Admin to ensure that the sertificate being used for authentication is valid.
And i still can't find a log in my NAS VPN-server (looked on the NAS's web-interface)