The content of this topic has been archived on 7 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hi Guys,
I am building a device and so far the only hardware I found to have 1000mw for 2.4ghz and 1000mw for 5.0 ghz and that supports 802.11 a/b/g/n/ac is the RB922 from mikrotik. I want to use this board as a wireless bridge with OpenWrt capabilities
http://routerboard.com/RB922UAGS-5HPacD
I'm a network engineer not a firmware guru like alot of you are.
Is there anyway we could make this happen?
I'd be willing to provide the board for testing!
(Last edited by cftvgy on 30 Oct 2015, 18:04)
Anyone? I'm also VERY interested in getting openwrt running on this hardware. The hardware it pretty nice, but routerOS doesn't fit my needs.
Hi,
I have just successfully built DD (dev trunk) for the RB921UAGS-5SHPacT-NM (netmetal 5) without issue.
Acea
I may have spoken too soon:
https://forum.openwrt.org/viewtopic.php … 31#p308431
USB not working on CC or DD
Acea
Hi 84ACE
Please let me know your Skype,, I need to develop new Firmware for Mikrotik RB922 ..
Thanks
The discussion might have continued from here.