OpenWrt Forum Archive

Topic: Errors

The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
WizKid
8 Jan 2016, 01:14

I'm constantly getting this in the system log:

[408983.288893] ieee80211 phy0: check ba result error 1
[408983.293889] ieee80211 phy0: ampdu start error code: -22

and it never stops!

Any help?

Post #2
slack---line
28 May 2017, 07:38

No help but I have the same, over and over and over...

[415790.388127] ieee80211 phy1: check ba result error 1
[415790.393134] ieee80211 phy1: ampdu start error code: -22
[415790.428120] ieee80211 phy1: check ba result error 1
[415790.433105] ieee80211 phy1: ampdu start error code: -22
[415790.468119] ieee80211 phy1: check ba result error 1
[415790.473104] ieee80211 phy1: ampdu start error code: -22
[415790.518133] ieee80211 phy1: check ba result error 1
[415790.523157] ieee80211 phy1: ampdu start error code: -22
[415790.558121] ieee80211 phy1: check ba result error 1
[415790.563120] ieee80211 phy1: ampdu start error code: -22
[415790.598120] ieee80211 phy1: check ba result error 1
[415790.603106] ieee80211 phy1: ampdu start error code: -22
[415790.638120] ieee80211 phy1: check ba result error 1
[415790.643117] ieee80211 phy1: ampdu start error code: -22
[415790.678153] ieee80211 phy1: check ba result error 1
[415790.683174] ieee80211 phy1: ampdu start error code: -22
[415790.718150] ieee80211 phy1: check ba result error 1
[415790.723197] ieee80211 phy1: ampdu start error code: -22
[415790.758163] ieee80211 phy1: check ba result error 1
[415790.763156] ieee80211 phy1: ampdu start error code: -22
[415791.458128] ieee80211 phy1: check ba result error 1
[415791.463127] ieee80211 phy1: ampdu start error code: -22
[415791.508117] ieee80211 phy1: check ba result error 1
[415791.513121] ieee80211 phy1: ampdu start error code: -22
[415791.558133] ieee80211 phy1: check ba result error 1
[415791.563127] ieee80211 phy1: ampdu start error code: -22
[415791.598117] ieee80211 phy1: check ba result error 1
[415791.603102] ieee80211 phy1: ampdu start error code: -22
[415791.648111] ieee80211 phy1: check ba result error 1
[415791.653096] ieee80211 phy1: ampdu start error code: -22
[415791.688118] ieee80211 phy1: check ba result error 1
[415791.693112] ieee80211 phy1: ampdu start error code: -22

This is also on a Linksys 1900ACS running OpenWrt Chaos Calmer 15.05.1 / LuCI 15.05-142-gb6330a1 Release (git-15.363.78009-956be55) Kernel Version    3.18.23

Post #3
nitroshift
28 May 2017, 08:38

You are running a very old version of the driver. Those errors have been fixed a while ago.

nitroshift

Post #4
slack---line
29 May 2017, 08:03

Ok, great, thanks for the info.

I'm waiting for the OpenWRT/LEDE merger to complete before upgrading (was going to switch to LEDE but since the two lineages will combine into one just going to wait and save myself an upgrade cycle).

The discussion might have continued from here.